Log In Cart
Log In

Create An Account

Log In Cart
Your Cart Is Empty

Fuelab High Efficiency 290mm Tall Fuel Surge Tank System 1500 HP Twin Screw Pump
Part Number: 61714

Images may be for reference only

Fuelab High Efficiency 290mm Tall Fuel Surge Tank System 1500 HP Twin Screw Pump
Part Number: 61714

Be the first to review!
$1,784.00 & Free Shipping

Earn 3568 Builders Club Points. Learn More

No Vehicle Specific Fitment

Not legal for sale or use in California on any pollution controlled motor vehicles.
6 In Stock
Ask a Question

Product Details

The FUELAB H/E Series Fuel Surge Tank System (61714) is a high-performance fuel delivery solution designed to maintain a consistent supply of fuel in demanding street performance, drag racing, road racing, and motorsport applications.

Featuring a 2.7-liter fuel reservoir, integrated brushless twin screw fuel pump, and electronic PWM speed control, the FUELAB 61714 combines high-volume fuel delivery with the fuel starvation protection of a dedicated surge tank system.

Unlike conventional fuel systems that rely exclusively on the factory fuel tank pickup, a fuel surge tank maintains a separate reserve of fuel for the high-pressure pump. This helps prevent temporary fuel starvation caused by fuel sloshing during hard acceleration, aggressive cornering, and braking.

The FUELAB 61714 features a single integrated brushless twin screw pump with a published flow specification of 600 LPH at 45 PSI and 13.5 volts, along with a maximum operating pressure of 125 PSI.

Its high-efficiency design incorporates an integrated electronic pump controller with pulse-width modulation (PWM) speed control, allowing compatible aftermarket engine management systems to regulate pump operation according to fuel demand.

Constructed from billet aluminum with stainless steel components and fuel-resistant seals, the 61714 is engineered for durability and compatibility with demanding performance fuel systems.

Whether supporting a turbocharged Honda K-Series engine, a high-output naturally aspirated build, or a dedicated motorsport vehicle, the FUELAB 61714 Brushless Fuel Surge Tank System delivers substantial fuel flow, advanced pump control, and improved resistance to fuel starvation.

Features

  • 2.7-Liter Fuel Surge Tank: Provides an independent fuel reservoir to help maintain consistent fuel delivery.

  • 600 LPH Rated Fuel Flow: Delivers approximately 158 gallons per hour at 45 PSI and 13.5 volts.

  • Brushless Twin Screw Fuel Pump: Features a single integrated high-output brushless pump.

  • Integrated Electronic Controller: Built-in pump control electronics eliminate the need for a separate external brushless pump controller.

  • PWM Speed Control: Allows compatible engine management systems to adjust fuel pump operation.

  • 100–5,000 Hz PWM Compatibility: Supports a wide range of aftermarket ECU control signals.

  • 125 PSI Maximum Operating Pressure: Designed for demanding high-pressure fuel system applications.

  • 290mm Tall Reservoir: Compact cylindrical design for compatible custom installations.

  • Billet Aluminum Construction: Precision-machined reservoir components for durability.

  • Stainless Steel Components: Provides additional corrosion resistance and structural durability.

  • Fuel-Resistant O-Ring Seals: Designed for compatible performance fuel applications.

  • -8AN Fuel Ports: Provides standardized connections for compatible aftermarket fuel plumbing.

  • E85 Compatible: Suitable for ethanol-based fuels, including E85.

  • Gasoline Compatible: Supports pump gasoline and racing gasoline.

  • Fuel Starvation Protection: Helps maintain a ready supply of fuel during rapid vehicle movements.

  • Factory Fuel Tank Integration: Can be incorporated into compatible original equipment fuel systems with limited tank modification.

  • Return-Style Fuel System: Requires appropriate return plumbing to the main fuel tank.

  • High-Horsepower Applications: Advertised for performance applications up to approximately 1,500 horsepower under suitable conditions.

  • Limited Lifetime Warranty: Backed by FUELAB's limited lifetime warranty, subject to manufacturer terms.

  • Universal Performance Application: Requires custom mounting, plumbing, and electrical integration.

Vehicle Fitment

The FUELAB 61714 is a universal aftermarket fuel surge tank system rather than a direct-fit replacement for a factory fuel pump assembly.

It can be incorporated into appropriately engineered fuel systems on a wide variety of performance vehicles.

Honda and Acura Applications

  • Honda Civic K20 and K24 Turbo Builds

  • Acura Integra K-Series Engine Swaps

  • Acura RSX Type-S High-Horsepower Builds

  • Honda S2000 Forced-Induction Applications

  • Honda Accord K-Series Performance Builds

  • Honda Prelude Engine Swap Projects

  • Dedicated Honda and Acura Drag Racing Vehicles

Additional Performance Applications

  • Subaru WRX and STI Performance Builds

  • Mitsubishi Lancer Evolution Turbo Applications

  • Toyota Supra High-Horsepower Builds

  • Nissan 240SX, 350Z, and 370Z Performance Projects

  • Chevrolet LS and LT Engine Builds

  • Ford Mustang Forced-Induction Applications

  • Custom Road Racing and Time Attack Vehicles

Important Fitment Note: These are examples of platforms that may utilize a custom surge tank system, not confirmed direct-fit applications.

Installation requires verification of mounting space, fuel line routing, electrical requirements, fuel pressure regulation, return plumbing, and overall fuel system compatibility.

Popular Performance Applications

  • Turbocharged Honda K20 Builds

  • Turbocharged Honda K24 Builds

  • High-Horsepower K-Series Engine Swaps

  • E85 Performance Fuel Systems

  • High-Boost Forced-Induction Engines

  • Front-Wheel-Drive Drag Racing Vehicles

  • Road Racing and Time Attack Applications

  • Autocross Performance Vehicles

  • High-Output Naturally Aspirated Engines

  • Custom Fuel Surge Tank Installations

  • Aftermarket ECU-Controlled Fuel Systems

  • Motorsport Fuel Starvation Prevention

  • Custom Return-Style Fuel Systems

Additional Information

  • Manufacturer: FUELAB
  • Manufacturer Part Number: 61714
  • Product Series: H/E Series
  • Product Name: Brushless Twin Screw Fuel Surge Tank System
  • Product Type: High-Performance Fuel Surge Tank Assembly
  • Reservoir Capacity: 2.7 Liters / Approximately 0.71 Gallons
  • Reservoir Height: 290mm / Approximately 11.42 Inches
  • Fuel Pump Configuration: Single Integrated Pump
  • Fuel Pump Technology: Brushless DC Twin Screw
  • Rated Fuel Flow: 600 LPH at 45 PSI and 13.5 Volts
  • Approximate Rated Flow: 158 GPH
  • Maximum Operating Pressure: 125 PSI / 8.5 Bar
  • Operating Voltage: 8–17 Volts (Model-Specific Installation Instructions)
  • Electronic Pump Controller: Integrated
  • Pump Speed Control: PWM
  • PWM Frequency Compatibility: 100–5,000 Hz
  • Reservoir Construction: Billet Aluminum and Stainless Steel Components
  • Sealing Material: Fuel-Resistant O-Ring Seals
  • Fuel Port Configuration: Three -8AN Female Feed / Return Ports and One -8AN Outlet Port
  • Fuel Compatibility: Gasoline, Racing Gasoline, and E85; Additional Fuels Subject to Manufacturer Approval
  • Fuel Return Line Required: Yes
  • External Bypass Fuel Pressure Regulator Required: Yes
  • Main Tank Lift / Feed Pump Required: Yes
  • Complete Surge Tank and Pump Assembly: Included
  • Optional Mounting Accessories: Sold Separately
  • Advertised Horsepower Support: Up to Approximately 1,500 HP Under Suitable Conditions
  • Warranty: FUELAB Limited Lifetime Warranty
  • Application: Universal Performance / Custom Fuel System Installation
  • Quantity: One Fuel Surge Tank System

2.7-Liter Fuel Surge Tank Design

One of the primary advantages of the FUELAB 61714 is its integrated 2.7-liter fuel reservoir.

During aggressive driving, fuel inside the vehicle's main tank can move away from the fuel pickup. This is especially common during hard acceleration, braking, and sustained cornering.

If the main fuel pump temporarily draws air instead of fuel, fuel pressure can drop and compromise engine performance.

The FUELAB surge tank helps address this problem by maintaining a separate supply of fuel around the high-pressure pump.

Potential benefits include:

  • Reduced risk of temporary fuel starvation

  • More consistent fuel availability during hard acceleration

  • Improved fuel supply during aggressive cornering

  • Additional fuel reserve during rapid vehicle transitions

  • Greater flexibility when integrating high-flow fuel pumps

  • Reduced dependence on the original fuel tank pickup during brief fuel movement events

The surge tank must receive an adequate supply of fuel from the main tank. An undersized or malfunctioning lift pump can still cause fuel starvation.

Brushless Twin Screw Fuel Pump Technology

The FUELAB 61714 incorporates a high-output brushless DC twin screw fuel pump.

Twin screw pump technology uses rotating screw elements to move fuel through the pump assembly.

Combined with an electronically controlled brushless motor, this design provides high-volume fuel delivery and adjustable pump operation.

Potential advantages include:

  • High fuel flow capacity

  • Electronic pump speed control

  • Reduced mechanical brush wear

  • Integrated controller electronics

  • Suitable operation in demanding performance fuel systems

  • Compatibility with supported aftermarket engine management systems

The pump is rated at 600 LPH at the manufacturer's specified test conditions.

Important: Actual fuel flow depends on operating pressure, voltage, fuel type, temperature, and system restrictions. The rated flow specification should not be interpreted as guaranteed delivery at every operating pressure.

Integrated PWM Fuel Pump Speed Control

The FUELAB 61714 includes an integrated electronic controller that supports PWM fuel pump speed control.

Pulse-width modulation allows a compatible engine management system to adjust pump operation by changing the control signal's duty cycle.

This provides a more flexible approach than operating a conventional fuel pump continuously at a fixed speed.

FUELAB lists compatibility with many aftermarket engine management systems that provide an appropriate PWM output, including:

  • AEM

  • ECUMaster

  • FuelTech

  • Haltech

  • Holley

  • Link Engine Management

  • MegaSquirt

The manufacturer specifies PWM frequency compatibility from 100 Hz to 5,000 Hz.

Important: ECU compatibility depends on the specific controller model, output configuration, and wiring requirements. Follow FUELAB's installation instructions when configuring pump speed control.

E85 and Performance Fuel Compatibility

The FUELAB 61714 is compatible with gasoline, racing gasoline, and ethanol-based fuels including E85.

E85 is commonly used in high-performance engines because of its knock resistance and charge-cooling characteristics.

However, ethanol-based fuels generally require greater fuel volume than gasoline to support comparable engine output.

The FUELAB 61714's high-flow pump and surge tank design make it suitable for properly engineered ethanol fuel systems.

When building an E85 fuel system, verify compatibility of all components, including:

  • Fuel injectors

  • Fuel pressure regulator

  • Fuel lines and fittings

  • Fuel filters

  • Seals and O-rings

  • Main tank lift pump

  • Fuel return plumbing

  • Engine management calibration

The complete fuel system must be sized according to the intended fuel and engine output.

High-Horsepower Fuel Delivery Capability

FUELAB markets the 61714 as a high-efficiency surge tank system suitable for demanding performance applications, with an advertised rating of approximately 1,500 horsepower.

This makes it an attractive option for appropriately configured high-output engines.

Potential applications include:

  • High-boost turbocharged engines

  • Supercharged performance vehicles

  • High-output naturally aspirated builds

  • Dedicated drag racing applications

  • Road racing and time attack vehicles

  • Custom motorsport fuel systems

Horsepower Rating Note: Actual horsepower support depends on fuel type, fuel pressure, injector requirements, electrical voltage, pump control settings, and fuel system restrictions.

E85 applications generally require greater fuel flow than gasoline applications, so the advertised gasoline horsepower figure should not be assumed to apply directly to ethanol fuel.

Billet Aluminum Construction and -8AN Fuel Ports

The FUELAB 61714 utilizes a billet aluminum reservoir assembly with stainless steel components and fuel-resistant seals.

The system incorporates -8AN fuel connections to support compatible aftermarket fuel plumbing.

Construction and installation advantages include:

  • Durable billet aluminum reservoir

  • Stainless steel components

  • O-ring-sealed construction

  • Standardized -8AN fuel connections

  • Serviceable fuel system configuration

  • Compact cylindrical design

The surge tank must be mounted securely in an appropriate location away from excessive heat, moving components, and potential impact hazards.

Return-Style Fuel System Requirements

The FUELAB 61714 requires a properly configured return-style fuel system.

The system uses a main tank feed pump to supply fuel to the surge tank, while the integrated brushless pump supplies high-pressure fuel to the engine.

Excess fuel must be returned through the appropriate fuel return plumbing.

A suitable bypass fuel pressure regulator or relief valve is required to prevent excessive fuel pressure.

Important: The surge tank assembly does not replace the need for a properly sized main tank lift pump, external fuel pressure regulator, return lines, and other supporting fuel system components.

Common Reasons for Replacement

  • Fuel Starvation During Racing: Help prevent temporary fuel supply interruptions during aggressive driving.

  • High-Horsepower Fuel System Upgrade: Add substantial fuel delivery capability for modified engines.

  • Turbocharger Installation: Support increased fuel demand from forced-induction applications.

  • E85 Conversion: Build a high-flow fuel system for ethanol-based performance fuel.

  • K-Series Engine Swap: Incorporate a dedicated surge tank into a custom K20 or K24 fuel system.

  • Factory Fuel Tank Limitations: Improve fuel supply consistency without extensive main tank modification.

  • PWM Pump Control Upgrade: Add electronically adjustable fuel pump operation.

  • Motorsport Preparation: Upgrade fuel delivery for demanding racing applications.

  • Custom Fuel System Build: Integrate a complete surge tank and brushless pump assembly.

Installation Notes

  1. Verify Fuel System Requirements: Confirm that the pump's flow capacity is sufficient at the intended operating pressure.

  2. Select a Suitable Mounting Location: Install the surge tank in a secure, protected, properly ventilated location consistent with FUELAB's instructions.

  3. Verify Reservoir Clearance: Confirm adequate space for the 290mm-tall assembly and all plumbing connections.

  4. Install Appropriate Mounting Hardware: Use compatible mounting brackets and hardware designed for the application.

  5. Provide a Main Tank Feed Pump: Ensure the lift pump can maintain an adequate fuel supply to the surge tank.

  6. Install the Required Fuel Pressure Regulator: Use a properly rated bypass regulator or relief valve to prevent overpressure.

  7. Connect the Fuel Feed Lines: Use compatible -8AN fittings and properly rated fuel hose.

  8. Connect the Return Plumbing: Route excess fuel back to the main fuel tank according to the manufacturer's instructions.

  9. Verify Fuel Compatibility: Confirm all components are suitable for gasoline, E85, or the selected approved fuel.

  10. Disconnect Battery Power: Isolate the electrical system before performing fuel system work.

  11. Follow Fuel Safety Procedures: Relieve fuel pressure and work away from flames, sparks, and ignition sources.

  12. Connect Electrical Power: Follow FUELAB's specified wiring, fuse protection, grounding, and voltage requirements.

  13. Configure PWM Control: Set up the integrated pump controller using a compatible ECU or approved control method.

  14. Inspect All Connections: Verify fuel plumbing, electrical wiring, and mounting hardware are secure.

  15. Prime the Fuel System: Follow the manufacturer's priming instructions before starting the engine.

  16. Perform a Leak Test: Inspect the complete fuel system for leaks.

  17. Verify Fuel Pressure: Confirm stable pressure at idle and during controlled operation.

  18. Validate Under Load: Monitor fuel pressure and pump operation during tuning and performance testing.

  19. Complete a Final Safety Inspection: Confirm proper operation before returning the vehicle to service.

Installation Recommendation: Professional installation is strongly recommended. Fuel system modifications involve flammable liquids, high-pressure plumbing, and electrical components.

What's Included

  • (1) FUELAB H/E Series 2.7L Fuel Surge Tank Assembly – 61714

  • (1) Integrated Brushless Twin Screw Fuel Pump

  • Integrated Electronic PWM Fuel Pump Controller

  • Reservoir Seals and Factory-Installed Pump Components

  • Manufacturer Installation Instructions and Performance Documentation

Not Included:

  • Main Fuel Tank Lift Pump

  • External Fuel Pressure Regulator

  • Vehicle-Specific Fuel Feed and Return Lines

  • Vehicle-Specific Electrical Wiring

  • Optional Surge Tank Mounting Accessory Kit

  • Additional Fuel System Components Unless Otherwise Specified

Upgrade your high-performance fuel system with the FUELAB H/E Series 2.7L Brushless Twin Screw Fuel Surge Tank System (61714) for high-volume fuel delivery, advanced electronic pump control, and improved protection against fuel starvation.

Featuring a 2.7-liter reservoir, integrated brushless twin screw fuel pump, 600 LPH rated flow, 125 PSI maximum operating pressure, PWM speed control, and durable billet aluminum construction, the FUELAB 61714 is designed for serious performance applications.

Whether building a turbocharged Honda K-Series engine, upgrading to E85, or preparing a dedicated drag racing or road racing vehicle, the FUELAB 61714 Fuel Surge Tank System provides a high-performance foundation for consistent fuel delivery under demanding operating conditions.

Part Number: 61714
Brand: Fuelab
CARB Approved: No


Not legal for sale or use in California on any pollution controlled motor vehicles. See http://www.semasan.com/emissions for state by state emissions requirements.
There is a 5% cancellation fee if you order this product and want to ship it to the state of California.

WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.

Vehicle Fitment

This part does not have vehicle specific fitment. Please contact us if you need assistance.

Reviews

No Reviews Yet!

Write a Review