Product Details
The FUELAB Dual 340 LPH Fuel Surge Tank System (60712) is a high-performance fuel delivery solution designed to provide consistent fuel flow during demanding driving conditions. Featuring two integrated 340 LPH electric fuel pumps and a 2.7-liter billet aluminum reservoir, this system helps protect performance engines against fuel starvation caused by fuel movement inside the main fuel tank.
With a combined rated flow of 680 liters per hour (180 GPH) at 45 PSI and 13.8 volts, the FUELAB 60712 delivers substantial fuel capacity for properly engineered naturally aspirated, turbocharged, and supercharged applications.
Fuel starvation can become a serious concern during hard acceleration, aggressive cornering, braking, and rapid changes in vehicle direction. When fuel moves away from the main tank pickup, the engine may experience an interruption in fuel supply. The FUELAB surge tank addresses this issue by maintaining a dedicated fuel reserve around its internal high-pressure pumps.
The system incorporates dual FUELAB 494 Series electric fuel pumps, billet aluminum construction, O-ring sealing, and -8AN fuel ports for integration into compatible aftermarket fuel systems.
Designed for gasoline, racing gasoline, and ethanol blends including E85, the 60712 is an excellent choice for enthusiasts building high-output fuel systems that demand both substantial flow capacity and improved fuel supply consistency.
Whether supporting a turbocharged Honda K20 or K24 engine, a dedicated drag racing vehicle, or a road racing application, the FUELAB 60712 Dual Pump Fuel Surge Tank System provides a complete surge tank and internal pump assembly for demanding performance builds.
Features
Dual 340 LPH Electric Fuel Pumps: Includes two integrated FUELAB 494 Series high-output fuel pumps.
680 LPH Combined Rated Flow: Delivers approximately 180 GPH at 45 PSI and 13.8 volts.
2.7-Liter Fuel Reservoir: Maintains a reserve of fuel for the integrated high-pressure pumps.
290mm Reservoir Height: Tall-body configuration for applications requiring additional surge tank capacity.
Billet Aluminum Construction: Durable machined aluminum reservoir construction.
O-Ring Sealing: Designed to provide secure fuel containment.
-8AN Fuel Ports: Supports compatible high-performance fuel plumbing.
E85 Compatible: Designed for ethanol blends, including E85.
Gasoline Compatible: Supports pump gasoline and racing gasoline.
85 PSI Maximum Operating Pressure: Suitable for properly configured fuel systems operating within the specified pressure limit.
8–18 Volt Operating Range: Compatible with appropriately configured 12V and 16V vehicle electrical systems.
Independent Pump Electrical Connections: Allows the pumps to be powered and controlled independently.
Staged Pump Operation: Supports appropriately configured staged dual-pump operation.
Integrated Pump Check Valves: Helps reduce fuel drain-back through the pumps.
Internal Safety Relief Valves: Provides pump-level pressure protection.
Fuel Starvation Protection: Helps maintain fuel availability during rapid vehicle movements.
Minimal Main Tank Modification: Can be integrated into suitable factory fuel systems without extensive tank modification.
Limited Lifetime Warranty: Backed by FUELAB's limited lifetime warranty, subject to manufacturer terms.
Vehicle Fitment
The FUELAB 60712 is a universal performance fuel surge tank system, not a direct-fit replacement for a factory fuel pump module.
It can be incorporated into appropriately engineered custom fuel systems.
Potential applications include:
Honda and Acura
Honda Civic K20 and K24 Turbo Builds
Acura Integra K-Series Engine Swaps
Acura RSX Type-S Performance Builds
Honda S2000 Forced-Induction Applications
Honda Accord K-Series Performance Projects
Honda Prelude Engine Swap Builds
Dedicated Honda and Acura Drag Racing Vehicles
Additional Performance Applications
Subaru WRX and STI Turbo Builds
Mitsubishi Lancer Evolution Performance Applications
Toyota Supra High-Horsepower Builds
Nissan 240SX, 350Z, and 370Z Performance Projects
Chevrolet LS and LT Performance Builds
Ford Mustang Forced-Induction Applications
Custom Road Racing and Motorsport Vehicles
Important Fitment Note: These are examples of vehicles that may utilize a custom fuel surge tank system, not confirmed direct-fit applications.
Installation requires verification of available mounting space, fuel plumbing, electrical capacity, regulator compatibility, and the vehicle's overall fuel system design.
Popular Performance Applications
Honda K20 Turbo Fuel Systems
Honda K24 Turbo Fuel Systems
K-Series Engine Swap Projects
E85 Performance Fuel Systems
High-Boost Forced-Induction Builds
Front-Wheel-Drive Drag Racing
Road Racing and Time Attack
Drift Competition Vehicles
Custom Dual-Pump Fuel Systems
High-Performance Street Builds
Motorsport Fuel Starvation Prevention
Return-Style Fuel System Conversions
Staged Electric Fuel Pump Applications
Additional Information
- Manufacturer: FUELAB
- Manufacturer Part Number: 60712
- Product Name: Dual 340 LPH E85 Pump Fuel Surge Tank System
- Product Type: Fuel Surge Tank Assembly
- Product Series: 607 Series
- Reservoir Capacity: 2.7 Liters / Approximately 0.71 Gallons
- Reservoir Height: 290mm / Approximately 11.42 Inches
- Pump Configuration: Dual Internal Electric Fuel Pumps
- Pump Series: FUELAB 494 Series
- Pump Technology: Conventional Brushed Electric Pumps
- Individual Pump Rating: 340 LPH
- Combined Rated Flow: 680 LPH at 45 PSI and 13.8 Volts
- Combined Flow in GPH: 180 GPH
- Maximum Operating Pressure: 85 PSI / 5.9 Bar
- Operating Voltage: 8–18 Volts
- Compatible Electrical Systems: Properly Configured 12V and 16V Systems
- Inlet / Return Port Configuration: Three -8AN Ports
- High-Pressure Outlet: One -8AN Port
- Reservoir Construction: Billet Aluminum
- Sealing: O-Ring Construction
- Pump Electrical Connections: Independent Ring-Terminal Style Connections
- Staged Pump Operation: Supported with Appropriate Controls
- Internal Check Valves: Yes
- Internal Pump Safety Relief Valves: Yes
- Fuel Compatibility: Gasoline, Racing Gasoline, and Ethanol Blends Including E85
- Methanol Compatibility: No
- Diesel Compatibility: No
- Main Tank Feed Pump Required: Yes
- Return Line Required: Yes
- External Bypass Fuel Pressure Regulator or Appropriate Pressure Control: Required
- Complete Surge Tank with Pumps: Included
- Optional Accessory Kit: Sold Separately
- UPC: 845096015190
- Application: Universal / Custom Performance Fuel System
- Quantity: One Complete Fuel Surge Tank System
2.7-Liter Fuel Surge Tank Design
The FUELAB 60712 features a 2.7-liter reservoir designed to maintain a consistent supply of fuel to its two internal pumps.
During hard acceleration, braking, or cornering, fuel can move away from the pickup inside the vehicle's main tank. This can interrupt fuel delivery, particularly when fuel levels are low or the original tank has limited baffling.
A properly installed surge tank helps reduce this risk by maintaining a separate fuel reserve.
Potential advantages include:
Reduced risk of temporary fuel starvation
Improved fuel availability during hard launches
Consistent fuel supply during aggressive cornering
Additional protection against fuel movement in the main tank
Support for high-flow fuel delivery systems
Flexible integration into custom performance vehicles
The surge tank must be continuously replenished by an appropriately sized main tank feed pump. It cannot compensate indefinitely for an inadequate fuel supply.
Dual 340 LPH Fuel Pump Configuration
The FUELAB 60712 incorporates two internal 340 LPH electric fuel pumps, providing a combined rated output of 680 LPH at the manufacturer's specified operating conditions.
The dual-pump arrangement is particularly useful for performance applications requiring substantial fuel volume.
Benefits include:
High combined fuel delivery capacity
Two integrated high-pressure pumps
Independent electrical connections
Support for staged pump operation
Compatibility with gasoline and E85
Compact integration within a single surge tank
The internal pumps utilize a regenerative turbine pumping mechanism with carbon-carbon commutators for ethanol compatibility.
Important: The 680 LPH rating applies at 45 PSI and 13.8 volts. Actual fuel flow decreases as operating pressure increases and can vary with voltage, fuel type, and system restrictions.
Independent Pump Control and Staged Operation
The FUELAB 60712 features independent electrical connections for its two internal fuel pumps.
This allows installers to configure the pumps for simultaneous operation or staged activation when supported by an appropriate electrical control system.
Staged operation can be useful in performance applications where fuel demand varies significantly between normal driving and high-load operation.
Potential advantages include:
Independent control of each pump
Flexible fuel pump activation strategies
Compatibility with suitable aftermarket ECU outputs
Reduced unnecessary pump operation when correctly configured
Greater flexibility when designing custom fuel systems
Both pumps must receive adequate electrical power and circuit protection.
Important: The 60712 uses conventional electric pumps rather than the integrated brushless pump and controller configuration found in certain other FUELAB surge tank systems.
E85 and Ethanol Fuel Compatibility
The FUELAB 60712 is designed for use with gasoline, racing gasoline, and ethanol-based fuels, including E85.
E85 is popular in performance applications because of its knock resistance and charge-cooling characteristics.
However, ethanol fuels generally require greater fuel volume than gasoline for equivalent engine output.
The 60712's dual-pump configuration makes it a practical foundation for appropriately sized ethanol-compatible performance fuel systems.
When using E85, verify that the complete fuel system is compatible, including:
Fuel injectors
Fuel pressure regulator
Fuel lines and fittings
Fuel filters
Main tank feed pump
Seals and O-rings
Electrical wiring
Engine management calibration
Fuel Compatibility Warning: FUELAB specifically states that the 60712 is not compatible with diesel or methanol. Use with those fuels is outside the manufacturer's approved application.
Billet Aluminum Construction and -8AN Fuel Connections
The FUELAB 60712 uses billet aluminum reservoir construction with O-ring sealing.
The system includes three -8AN inlet/return ports and one -8AN high-pressure outlet.
This configuration supports integration into compatible return-style fuel systems using appropriately sized aftermarket plumbing.
Construction highlights include:
Billet aluminum reservoir
O-ring-sealed assembly
Standardized -8AN fuel connections
Dual integrated fuel pumps
Independent pump electrical terminals
Compact cylindrical configuration
All plumbing must be compatible with the intended fuel and operating pressure.
Return-Style Fuel System Requirements
The FUELAB 60712 requires an appropriately configured return-style fuel system.
A main tank feed pump supplies fuel to the surge tank, while the integrated pumps deliver high-pressure fuel to the engine.
Excess fuel must return through the appropriate plumbing to the main fuel tank.
The system also requires a suitable bypass fuel pressure regulator or pressure-control arrangement to prevent excessive pressure.
Key supporting components may include:
Main tank feed pump
Fuel pressure regulator
Fuel feed and return lines
Fuel filters
Compatible AN fittings
Proper electrical relays and fuses
Secure mounting hardware
Important: The surge tank assembly does not eliminate the need for the supporting components required by the vehicle's complete fuel system.
Common Reasons for Replacement
Fuel Starvation During Racing: Help prevent fuel supply interruptions during aggressive acceleration or cornering.
High-Horsepower Fuel System Upgrade: Increase fuel delivery capability for modified engines.
Turbocharger Installation: Support increased fuel demand from forced-induction applications.
E85 Conversion: Build an ethanol-compatible fuel system with substantial flow capacity.
K-Series Engine Swap: Add a dedicated surge tank to a custom K20 or K24 fuel system.
Factory Fuel Tank Limitations: Address inadequate baffling or temporary fuel pickup starvation.
Dual-Pump Conversion: Upgrade to a high-flow dual-pump fuel delivery arrangement.
Motorsport Preparation: Improve fuel system capability for demanding racing applications.
Custom Fuel System Build: Incorporate a complete fuel surge tank and pump assembly.
Installation Notes
Verify Fuel Flow Requirements: Confirm the dual-pump assembly provides adequate fuel delivery at the intended operating pressure.
Select a Suitable Mounting Location: Install the surge tank securely in a location consistent with FUELAB's instructions and applicable safety requirements.
Check Reservoir Clearance: Verify adequate space for the 290mm-tall assembly, plumbing, and electrical connections.
Install Compatible Mounting Hardware: Use an appropriate mounting arrangement and secure the reservoir against vibration and movement.
Provide a Main Tank Feed Pump: Ensure the main fuel tank can adequately replenish the surge tank.
Install Appropriate Fuel Pressure Regulation: Use a suitable bypass regulator or approved pressure-control arrangement.
Connect Fuel Plumbing: Install compatible -8AN fuel connections according to the manufacturer's port diagram.
Connect the Return Line: Route excess fuel back to the main fuel tank.
Verify Fuel Compatibility: Use only approved gasoline or ethanol-based fuels.
Disconnect Battery Power: Isolate the electrical system before installation.
Relieve Fuel System Pressure: Follow the appropriate service procedure before opening fuel lines.
Connect Both Pump Circuits: Use suitable wiring, relays, fuses, and grounding for the pumps' electrical demand.
Configure Pump Staging if Required: Follow the electrical control manufacturer's instructions.
Inspect All Connections: Confirm that the fuel lines, terminals, and mounting hardware are secure.
Prime the Fuel System: Follow FUELAB's recommended priming procedure.
Perform a Leak Test: Inspect the complete system before operating the engine.
Verify Fuel Pressure: Confirm stable fuel pressure during normal operation.
Validate Under Load: Monitor fuel pressure and electrical performance during controlled tuning and testing.
Complete Final Safety Inspection: Verify proper installation before returning the vehicle to service.
Installation Recommendation: Professional installation is strongly recommended for high-performance fuel surge tank systems.
Emissions Note: FUELAB identifies this product for racing, off-road, or marine use. Use on emissions-controlled vehicles may be restricted by applicable regulations.
What's Included
(1) FUELAB 2.7L Fuel Surge Tank Assembly – 60712
(2) FUELAB 340 LPH E85-Compatible Electric Fuel Pumps, Pre-Installed
(4) -908 O-Rings
Manufacturer Installation Instructions
Fuel Pump Performance Certification Documentation
Not Included:
Main Fuel Tank Feed Pump
External Fuel Pressure Regulator
Vehicle-Specific Fuel Feed and Return Lines
Electrical Relays, Fuses, and Vehicle-Specific Wiring
Optional FUELAB FST Upgrade Accessory Kit
Additional Mounting and Plumbing Accessories Unless Otherwise Specified
Upgrade your performance fuel system with the FUELAB Dual 340 LPH E85 Fuel Surge Tank System (60712) for high-volume fuel delivery, improved protection against fuel starvation, and durable billet aluminum construction.
Featuring two integrated 340 LPH electric fuel pumps, a combined rated flow of 680 LPH, a 2.7-liter reservoir, -8AN fuel ports, and compatibility with gasoline and E85, the FUELAB 60712 is designed for demanding performance applications.
Whether building a turbocharged Honda K-Series engine, upgrading an E85 fuel system, or preparing a dedicated drag racing or road racing vehicle, the FUELAB 60712 Dual Pump Fuel Surge Tank System provides a complete surge tank and internal pump assembly engineered for consistent fuel delivery under demanding conditions.
| Part Number: | 60712 |
| Brand: | Fuelab |
| Size: | 340lph |
| CARB Approved: | No |
Not legal for sale or use in California on any pollution controlled motor vehicles. See http://www.semasan.com/emissions for state by state emissions requirements.
There is a 5% cancellation fee if you order this product and want to ship it to the state of California.
WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.
Vehicle Fitment
Reviews
No Reviews Yet!
Write a Review