Product Details
The Ferrea S10182 Single Performance Valve Spring is a high-performance valvetrain component engineered for the 2017–2020 Honda Civic Si equipped with the 1.5L turbocharged L15 engine. Designed for demanding turbocharged and endurance applications, these springs provide improved valve control and consistent spring pressure for properly configured performance engines.
Manufactured from a specialized high-strength alloy, the Ferrea S10182 is designed to withstand repeated compression cycles, elevated engine speeds, and demanding operating conditions. Its performance-oriented construction makes it an excellent choice for enthusiasts upgrading their Honda Civic Si cylinder head for increased horsepower, aftermarket camshafts, or more aggressive driving conditions.
Featuring a 21.35mm outside diameter and 14.98mm inside diameter, the S10182 utilizes a single-spring configuration with progressive coil winding to provide reliable valve control while maintaining a compact design.
Ferrea specifies different installed heights and spring pressures for intake and exhaust applications, allowing the same spring part number to be used on both sides of the cylinder head when paired with the appropriate retainers and spring seat locators.
On the intake side, the S10182 provides 65 lbs of seat pressure and 130 lbs of open pressure, with a maximum net valve lift of 10.50mm. On the exhaust side, it provides 60 lbs of seat pressure and 125 lbs of open pressure, with a maximum net valve lift of 10.80mm.
The S10182 requires specific Ferrea titanium retainers and spring seat locators for proper installation. These supporting components are available separately or as part of Ferrea's complete KT4051 valve spring kit.
Whether rebuilding a turbocharged Honda Civic Si engine, upgrading the valvetrain for increased performance, or preparing an L15 engine for demanding street and track use, the Ferrea S10182 provides a precision-engineered solution for improved valve spring performance.
Features
Honda Civic Si L15 Turbo Application: Designed for the 2017–2020 Honda Civic Si 1.5L turbocharged engine.
Single Valve Spring Configuration: Compact performance-oriented spring design for compatible intake and exhaust applications.
Special Alloy Construction: Manufactured using a performance-grade alloy designed for demanding operating conditions.
Turbo and Endurance Applications: Engineered for performance engines operating under elevated loads and sustained engine speeds.
21.35mm Outside Diameter: Application-specific dimensions for compatible L15 cylinder heads.
14.98mm Inside Diameter: Designed for use with the required Ferrea retainers and spring seat locators.
Progressive Coil Winding: Ferrea Pro Spring construction incorporates progressively wound coils.
65 lbs Intake Seat Pressure: Specified at a 45.70mm installed height.
130 lbs Intake Open Pressure: Specified at a 35.70mm spring height.
60 lbs Exhaust Seat Pressure: Specified at a 43.10mm installed height.
125 lbs Exhaust Open Pressure: Specified at a 33.10mm spring height.
165 lbs/in Spring Rate: Manufacturer-listed spring rate.
10.50mm Maximum Intake Net Lift: Maximum manufacturer-listed intake valve lift.
10.80mm Maximum Exhaust Net Lift: Maximum manufacturer-listed exhaust valve lift.
Compatible with Ferrea Titanium Retainers: Requires application-specific intake and exhaust retainers.
Performance Valvetrain Upgrade: Suitable for professionally prepared turbocharged and motorsport engine builds.
Vehicle Fitment
Honda Civic Si – 1.5L Turbocharged
2017 Honda Civic Si Coupe (FC3) – L15B7
2017 Honda Civic Si Sedan (FC1) – L15B7
2018 Honda Civic Si Coupe / Sedan – L15B7
2019 Honda Civic Si Coupe / Sedan – L15B7
2020 Honda Civic Si Coupe / Sedan – L15B7
Engine Code:
L15B7 – 1.5L DOHC VTEC Turbocharged
Important Fitment Note: Ferrea catalogs the S10182 for the 2017–2020 Honda Civic Si 1.5L turbocharged engine.
Compatibility with other Honda L15 engines, including non-Si Civic applications, Accord 1.5T engines, or newer Civic Si generations, should not be assumed without manufacturer confirmation.
Popular Performance Applications
2017–2020 Honda Civic Si Engine Rebuilds
Honda L15B7 Turbocharged Performance Builds
10th Generation Civic Si Valvetrain Upgrades
Upgraded Turbocharger Applications
Performance Camshaft Installations
High-RPM Honda L15 Engine Builds
Street and Track Performance Engines
Turbocharged Endurance Applications
Cylinder Head Reconditioning
Complete Valve Spring and Retainer Upgrades
Motorsport Cylinder Head Preparation
Ferrea KT4051 Valve Spring Kit Replacement Components
Additional Information
- Manufacturer: Ferrea Racing Components
- Manufacturer Part Number: S10182
- Product Type: Performance Valve Spring
- Engine Application: Honda Civic Si L15 Turbo
- Vehicle Years: 2017–2020
- Spring Configuration: Single
- Material: Special Alloy
- Application Type: Turbo / Endurance
- Outside Diameter: 21.35mm
- Inside Diameter: 14.98mm
- Spring Rate: 165 lbs/in
- Intake Seat Pressure: 65 lbs @ 45.70mm
- Intake Open Pressure: 130 lbs @ 35.70mm
- Intake Coil Bind Height: 34.30mm
- Maximum Intake Net Lift: 10.50mm
- Exhaust Seat Pressure: 60 lbs @ 43.10mm
- Exhaust Open Pressure: 125 lbs @ 33.10mm
- Exhaust Coil Bind Height: 31.30mm
- Maximum Exhaust Net Lift: 10.80mm
- Required Intake Retainer: Ferrea E11151
- Required Exhaust Retainer: Ferrea E11150
- Required Intake Spring Seat Locator: Ferrea SL1182
- Required Exhaust Spring Seat Locator: Ferrea SL1181
- Compatible Valve Locks: Ferrea K10116
- Complete Ferrea Valve Spring Kit: KT4051
- Quantity Required for Complete Cylinder Head: 16 Springs
- Installation: Professional Cylinder Head Assembly Recommended
Special Alloy Construction & Performance Benefits
The Ferrea S10182 is manufactured using a specialized performance alloy developed for demanding valvetrain applications.
During engine operation, valve springs repeatedly compress and expand to maintain contact between the camshaft, rocker assembly, and valves.
As engine speed increases, valve springs must control increasingly rapid valve movement while resisting fatigue and maintaining sufficient pressure.
Ferrea's performance valve spring technology is designed to provide the stability needed for properly configured high-performance engines.
Benefits include:
Improved Valve Control: Helps maintain consistent valve operation at elevated engine speeds.
Fatigue Resistance: Performance alloy construction is designed for repeated compression cycles.
Consistent Spring Pressure: Supports dependable valve seating and valvetrain operation.
Turbocharged Engine Suitability: Developed for demanding forced induction and endurance applications.
Performance Camshaft Compatibility: Can support appropriately matched aftermarket camshaft configurations.
Professional Engine Building Applications: Provides application-specific spring characteristics for performance cylinder head preparation.
Proper spring selection, installed height, valve lift, and retainer compatibility are essential for achieving reliable performance.
Intake & Exhaust Spring Specifications
Although the S10182 uses the same spring part number for both intake and exhaust positions, Ferrea specifies different installed heights and operating pressures for each application.
| Specification | Intake | Exhaust |
|---|---|---|
| Seat pressure | 65 lbs | 60 lbs |
| Seat height | 45.70mm | 43.10mm |
| Open pressure | 130 lbs | 125 lbs |
| Open height | 35.70mm | 33.10mm |
| Coil bind height | 34.30mm | 31.30mm |
| Maximum net lift | 10.50mm | 10.80mm |
| Spring rate | 165 lbs/in | 165 lbs/in |
Important: These are Ferrea's published spring specifications. Actual installed spring pressure depends on the completed cylinder head assembly and must be verified during installation.
Required Ferrea Retainers & Spring Seat Locators
The Ferrea S10182 requires application-specific supporting valvetrain components for proper installation.
Intake Side:
Ferrea E11151 Titanium Retainer
Ferrea SL1182 Spring Seat Locator
Exhaust Side:
Ferrea E11150 Titanium Retainer
Ferrea SL1181 Spring Seat Locator
Valve Locks:
Ferrea K10116 Steel Valve Locks
Ferrea specifies that the factory spring seat locators must be discarded when installing this spring configuration.
The S10182 is also included in Ferrea's KT4051 Complete Valve Spring Kit, which contains:
(16) Ferrea S10182 Single Valve Springs
(8) Ferrea E11151 Intake Titanium Retainers
(8) Ferrea E11150 Exhaust Titanium Retainers
(8) Ferrea SL1182 Intake Spring Seat Locators
(8) Ferrea SL1181 Exhaust Spring Seat Locators
(16) Ferrea K10116 Valve Locks
For customers performing a complete valvetrain upgrade, the KT4051 kit provides the required matched components.
Progressive Coil Winding Technology
The Ferrea S10182 utilizes a progressive coil winding configuration.
Unlike conventional springs with uniform spacing between all coils, progressive springs incorporate varying coil spacing designed to provide the intended spring behavior throughout compression.
Ferrea specifies that the closely stacked coils must face downward, resting on the spring seat locator.
Correct orientation is essential to the intended installation.
Benefits of Ferrea's progressive spring design include:
Performance-oriented spring characteristics.
Compact single-spring construction.
Compatibility with the specified intake and exhaust installed heights.
Application-specific valve control for turbocharged engines.
Integration with Ferrea's matching titanium retainers and spring seat locators.
Important: Incorrect spring orientation or improper installed height may affect valvetrain operation and component clearance.
Common Reasons for Replacement
Factory Valve Spring Upgrade: Replace original equipment valve springs with a performance-oriented Ferrea configuration.
Turbocharger Upgrades: Improve valvetrain preparation when increasing engine performance.
High-RPM Engine Builds: Install springs designed for demanding engine-speed applications.
Performance Camshaft Installation: Match valve springs to compatible aftermarket camshaft requirements.
Cylinder Head Rebuild: Replace worn or fatigued valve springs during engine reconditioning.
Valve Spring Fatigue: Address springs that no longer meet the required installed pressure specifications.
Motorsport Engine Preparation: Upgrade the valvetrain for demanding track and endurance applications.
Damaged Spring Replacement: Replace a damaged S10182 spring within an existing compatible Ferrea valvetrain assembly.
Installation Notes
Verify Engine Compatibility: Confirm the cylinder head is a supported 2017–2020 Honda Civic Si 1.5L turbocharged application.
Inspect the Cylinder Head: Check valve guides, valve seats, valves, and related components before installation.
Use Required Retainers: Install Ferrea E11151 intake retainers and E11150 exhaust retainers.
Replace Factory Spring Seat Locators: Ferrea requires SL1182 intake and SL1181 exhaust seat locators. Discard the factory locators as instructed.
Verify Valve Lock Compatibility: Use compatible Ferrea K10116 valve locks.
Orient Springs Correctly: Install the closely stacked coil end downward against the spring seat locator.
Measure Installed Spring Height: Verify the correct installed height for each intake and exhaust valve position.
Confirm Seat and Open Pressure: Measure spring pressure and compare the results with Ferrea's published specifications.
Check Coil Bind Clearance: Verify adequate clearance at maximum valve lift and throughout the complete camshaft operating range.
Verify Camshaft Compatibility: Confirm the selected camshaft profile and maximum lift are appropriate for the S10182 spring configuration.
Inspect Retainer-to-Seal Clearance: Check clearance between the valve spring retainer, valve stem seal, and surrounding cylinder head components.
Perform Final Valvetrain Inspection: Verify correct assembly, smooth operation, and proper clearances before engine operation.
What's Included
Ferrea S10182 Single Performance Valve Spring(s), in the quantity specified by the selected retail package.
Important Packaging Note: The S10182 is a spring part number rather than a complete valvetrain kit. Some retailers package these springs in sets of four, while the complete Ferrea KT4051 kit contains 16 springs.
Titanium retainers, spring seat locators, valve locks, and other valvetrain components are sold separately unless specifically included in the product listing.
Upgrade your 2017–2020 Honda Civic Si 1.5L Turbo valvetrain with the Ferrea S10182 Single Performance Valve Spring for reliable valve control, performance-oriented spring pressure, and durable special alloy construction.
Featuring progressive coil winding, a compact single-spring design, application-specific intake and exhaust specifications, and compatibility with Ferrea's titanium retainers and spring seat locators, the S10182 is an excellent choice for properly engineered turbocharged L15 performance builds.
Whether rebuilding a factory cylinder head, upgrading an existing valvetrain, or preparing a high-performance Civic Si engine, the Ferrea S10182 delivers the precision and engineering expected from Ferrea Racing Components.
| Part Number: | S10182 |
| Brand: | Ferrea |
| Valve Spring Seat Pressure: | 65 lbs |
| Valve Spring Open Pressure: | 130 lbs |
WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.
Vehicle Fitment
| Year | Make | Model | Trim |
|---|---|---|---|
| 2017 | Honda | Civic | Si |
| 2018 | Honda | Civic | Si |
| 2019 | Honda | Civic | Si |
| 2020 | Honda | Civic | Si |
Engine Fitment
| Engine |
|---|
| Honda 1.5L/1497CC - 4 Cylinder (L15B7) |
| Honda 1.5L/1497CC - 4 Cylinder (L15B7) |
| Honda 1.5L/1497CC - 4 Cylinder (L15B7) |
| Honda 1.5L/1497CC - 4 Cylinder (L15B7) |
Reviews
No Reviews Yet!
Write a Review