Product Details
The Ferrea RR1004 Competition 2nd Generation Roller Rocker Arm is a high-performance valvetrain component engineered for Honda K20 DOHC VTEC engines used in demanding drag racing and motorsport applications. Manufactured from lightweight aluminum-magnesium alloy, this competition-oriented rocker arm is designed to reduce valvetrain mass, minimize friction, and support improved stability at elevated engine speeds.
Unlike conventional factory Honda K-series rocker assemblies, the Ferrea RR1004 incorporates a precision roller-contact design intended to reduce sliding friction between the camshaft and rocker arm. Its CNC-machined construction provides an excellent combination of reduced weight, strength, and durability for professionally prepared racing engines.
Ferrea developed the RR1004 specifically for competition applications that eliminate the factory VTEC switching function. The system operates using the camshaft's center lobe rather than the factory three-lobe VTEC switching arrangement.
This configuration requires a compatible standalone engine management system, proper ECU calibration, and removal of the factory lost-motion assembly components. It is not intended as a direct replacement for a standard factory VTEC rocker arm while retaining normal VTEC operation.
One of the RR1004's primary advantages is its substantial reduction in rocker assembly weight. Ferrea lists a factory rocker assembly mass of approximately 307 grams, compared with 160 grams for the Ferrea competition assembly, representing a 48% reduction in mass.
The rocker fulcrum is also significantly lighter, with Ferrea specifying a reduction from approximately 134 grams for the factory component to 78 grams for the competition version.
Reducing valvetrain mass can help decrease the forces associated with rapid valve acceleration and deceleration, making the RR1004 an attractive option for high-RPM Honda K-series engine builds.
Whether preparing a naturally aspirated K20 drag racing engine, upgrading a dedicated motorsport cylinder head, or developing a custom K-series valvetrain, the Ferrea RR1004 delivers advanced competition-oriented engineering and lightweight construction.
Features
Competition Roller Rocker Design: Developed specifically for demanding Honda K20 drag racing and motorsport applications.
2nd Generation Construction: Performance-oriented rocker arm design engineered for competition use.
Aluminum-Magnesium Alloy: Lightweight material provides an excellent balance of strength and reduced mass.
Precision CNC-Machined Construction: Manufactured for consistent dimensions and performance-oriented weight reduction.
Roller-Contact Camshaft Interface: Designed to reduce sliding friction compared with conventional factory rocker pad arrangements.
48% Rocker Assembly Mass Reduction: Ferrea specifies 160 grams compared with approximately 307 grams for the factory rocker assembly.
Lightweight Fulcrum: Ferrea lists a 78-gram fulcrum compared with the factory 134-gram component.
Center-Lobe Camshaft Operation: Designed to operate using the center camshaft lobe.
VTEC Elimination Configuration: Requires disabling factory VTEC operation and removing the lost-motion assembly components.
Standalone ECU Required: Requires a compatible standalone engine management system and appropriate calibration.
Camshaft Compatibility: Ferrea identifies compatibility with factory, Ferrea, and other aftermarket camshafts, subject to complete valvetrain verification.
High-RPM Performance Applications: Reduced valvetrain mass supports properly engineered high-engine-speed applications.
Dedicated Racing Component: Intended for professionally built competition engines rather than conventional street-oriented replacements.
Honda K-Series Applications: Developed for compatible K20 DOHC VTEC cylinder heads.
Sold Individually by KSeriesParts.com: Quantity one corresponds to one roller rocker arm.
Vehicle Fitment
Acura RSX Type-S
2002–2004 Acura RSX Type-S – K20A2
2005–2006 Acura RSX Type-S – K20Z1
Honda Civic Si
2006–2011 Honda Civic Si – K20Z3
Additional K-Series Applications Listed by KSeriesParts.com
2004–2008 Acura TSX – K24A2
Engine Codes Listed by KSeriesParts.com:
K20A2 – 2.0L DOHC VTEC
K20Z1 – 2.0L DOHC VTEC
K20Z3 – 2.0L DOHC VTEC
K24A2 – 2.4L DOHC VTEC
Important Fitment Note: Ferrea's manufacturer application information identifies RR1004 primarily for Honda/Acura K20 DOHC VTEC competition applications.
KSeriesParts.com additionally lists K24A2 applications. Because the RR1004 requires a specialized center-lobe, non-VTEC operating configuration, compatibility with a specific K24 cylinder head and valvetrain combination should be confirmed with Ferrea before installation.
The RR1004 is not a direct-fit replacement for the factory rocker assembly when retaining normal VTEC functionality.
Popular Performance Applications
Honda K20A2 Drag Racing Engine Builds
Honda K20Z1 Competition Cylinder Heads
Honda K20Z3 High-RPM Performance Engines
Acura RSX Type-S Dedicated Race Cars
Honda Civic Si Motorsport Builds
K-Series Engine Swap Competition Vehicles
Naturally Aspirated High-RPM K20 Engines
Turbocharged K-Series Drag Racing Builds
Custom Non-VTEC K-Series Valvetrain Configurations
Standalone ECU-Controlled Racing Engines
Professional Cylinder Head Development
Dedicated Track and Motorsport Applications
Additional Information
- Manufacturer: Ferrea Racing Components
- Manufacturer Part Number: RR1004
- Product Name: Competition 2nd Generation Roller Rocker Arm
- Product Type: Performance Roller Rocker Arm
- Primary Engine Application: Honda K20 DOHC VTEC
- Construction Material: Aluminum-Magnesium Alloy
- Manufacturing Process: Precision CNC Machining
- Rocker Assembly Mass: 160 Grams (Ferrea Reference Assembly)
- Factory Rocker Assembly Mass: 307 Grams (Ferrea Reference Assembly)
- Rocker Assembly Mass Reduction: Approximately 48%
- Ferrea Fulcrum Mass: 78 Grams
- Factory Fulcrum Mass: 134 Grams
- Camshaft Operation: Center Lobe Only
- Factory VTEC Operation: Must Be Disabled
- Lost-Motion Assembly: Removal Required
- Engine Management: Compatible Standalone ECU Required
- Camshaft Compatibility: Factory, Ferrea, or Compatible Aftermarket Camshafts
- Application Type: Competition / Drag Racing
- KSeriesParts.com Sales Quantity: One Roller Rocker Arm
- Installation: Professional Performance Engine Assembly Recommended
Lightweight Aluminum-Magnesium Construction
The Ferrea RR1004 utilizes a specialized aluminum-magnesium alloy designed to provide the strength and reduced mass required for demanding motorsport valvetrain applications.
Traditional factory rocker assemblies are manufactured to accommodate a broad range of operating conditions, including normal VTEC engagement and long-term street use.
The RR1004 takes a different approach, focusing on reduced valvetrain mass and competition-oriented performance.
Ferrea specifies the following comparative assembly weights:
| Component | Factory Assembly | Ferrea RR1004 |
|---|---|---|
| Rocker assembly | 307g | 160g |
| Rocker fulcrum | 134g | 78g |
The reduction in rocker assembly mass is approximately 48%, while the fulcrum mass is reduced by approximately 42%.
Benefits of reduced valvetrain mass may include:
Lower inertial loading during rapid valve acceleration and deceleration.
Improved valvetrain control when combined with appropriately selected valve springs.
Reduced mechanical loading on compatible valvetrain components.
Greater flexibility when developing high-RPM competition engine combinations.
Improved efficiency through lightweight construction and roller-contact geometry.
Important: These are Ferrea's comparative assembly specifications, not the shipping weight or individual weight of one replacement rocker arm.
Competition Roller Rocker Technology
The RR1004 is designed to replace the conventional sliding-contact arrangement with a roller-contact interface.
The roller mechanism is intended to reduce friction between the camshaft and rocker arm during operation.
The system incorporates precision-machined components designed to maintain stable rocker movement under demanding operating conditions.
Potential benefits include:
Reduced sliding friction at the camshaft contact point.
Reduced valvetrain mass compared with the factory reference assembly.
Performance-oriented operation at elevated engine speeds.
Improved suitability for professionally engineered racing valvetrains.
Compatibility with custom camshaft and valve spring combinations when properly verified.
The RR1004 should be installed only as part of a complete, compatible valvetrain configuration.
VTEC Elimination & Standalone ECU Requirements
One of the most important considerations when purchasing the Ferrea RR1004 is its specialized operating configuration.
Unlike the factory Honda K20 VTEC rocker assembly, the RR1004 is designed to operate using the center camshaft lobe only.
Ferrea specifically requires that the factory VTEC function be disconnected and the lost-motion assembly components removed.
This conversion changes how the engine's valvetrain operates and requires a compatible standalone ECU capable of supporting the resulting configuration.
Key requirements include:
Factory VTEC switching must be disabled.
Factory lost-motion assembly components must be removed.
The camshaft's center lobe is used for rocker operation.
A compatible standalone ECU must be installed and properly calibrated.
Camshaft, valve spring, retainer, and rocker clearances must be verified.
The complete valvetrain must be inspected for proper geometry and operating clearance.
Important: The RR1004 is not intended for a standard factory ECU-controlled VTEC system. It should not be purchased as a conventional replacement rocker arm for a stock K20 engine.
Common Reasons for Replacement
Competition Valvetrain Upgrade: Replace factory rocker components with a lightweight competition-oriented design.
High-RPM Engine Preparation: Reduce valvetrain mass in professionally engineered racing engines.
Drag Racing Engine Builds: Incorporate center-lobe roller rocker technology into dedicated competition applications.
VTEC Elimination Conversions: Configure a compatible K20 cylinder head for non-switching center-lobe operation.
Performance Cylinder Head Development: Utilize advanced rocker construction during custom valvetrain development.
Standalone ECU Racing Builds: Integrate a specialized valvetrain with compatible aftermarket engine management.
Damaged Competition Rocker Replacement: Replace a worn or damaged Ferrea RR1004 component.
Complete Motorsport Engine Rebuild: Incorporate lightweight rocker arms into a coordinated high-performance valvetrain assembly.
Installation Notes
Verify Cylinder Head Compatibility: Confirm the engine and cylinder head are compatible with Ferrea's RR1004 competition rocker configuration.
Confirm Intended Application: This component is intended for specialized racing applications and is not a conventional factory VTEC rocker replacement.
Disable VTEC Operation: Follow Ferrea's requirements for disconnecting the factory VTEC function.
Remove Lost-Motion Components: Remove the factory lost-motion assembly components as specified by Ferrea.
Use Compatible Engine Management: Install and configure a suitable standalone ECU for the non-VTEC operating arrangement.
Verify Camshaft Compatibility: Confirm the center camshaft lobe, profile, base circle, and rocker contact geometry are appropriate for the application.
Inspect Valve Spring Requirements: Verify spring pressures, available travel, and compatibility with the intended engine speed and camshaft profile.
Check Retainer and Rocker Clearance: Confirm adequate clearance throughout the complete camshaft rotation.
Verify Rocker Assembly Geometry: Inspect the rocker mounting arrangement, alignment, and mechanical clearances.
Inspect Related Valvetrain Components: Check valves, guides, retainers, locks, springs, and camshafts for wear or damage.
Follow Ferrea Installation Procedures: Use the manufacturer's recommended assembly procedures and specifications.
Perform Final Engine Validation: Confirm proper mechanical operation and complete ECU calibration before operating the engine under load.
What's Included
(1) Ferrea RR1004 Competition 2nd Generation Aluminum-Magnesium Roller Rocker Arm
Important Packaging Note: KSeriesParts.com currently specifies that quantity one equals one roller rocker arm. Ferrea's manufacturer catalog describes the RR1004 as sold in pairs, while some retailers offer complete sets of eight.
Confirm the actual packaged quantity and any included hardware before publishing or fulfilling orders.
Camshafts, valve springs, retainers, standalone ECU components, and other valvetrain hardware are not included unless specifically stated.
Upgrade your Honda K20 competition valvetrain with the Ferrea RR1004 Competition 2nd Generation Aluminum-Magnesium Roller Rocker Arm for lightweight construction, reduced mechanical friction, and advanced racing-oriented engineering.
Featuring precision CNC-machined aluminum-magnesium construction, a roller-contact camshaft interface, and a manufacturer-reported 48% reduction in rocker assembly mass, the RR1004 is designed for dedicated drag racing and high-performance K-series engine applications.
For builders developing specialized center-lobe, non-VTEC K20 racing engines, the Ferrea RR1004 provides the engineering and manufacturing quality expected from Ferrea Racing Components.
| Part Number: | RR1004 |
| Brand: | Ferrea |
WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.
Vehicle Fitment
| Year | Make | Model | Trim |
|---|---|---|---|
| 2002 | Acura | RSX | Type-S |
| 2003 | Acura | RSX | Type-S |
| 2004 | Acura | RSX | Type-S |
| 2004 | Acura | TSX | Base |
| 2005 | Acura | RSX | Type-S |
| 2005 | Acura | TSX | Base |
| 2006 | Acura | RSX | Type-S |
| 2006 | Acura | TSX | Base |
| 2006 | Honda | Civic | Si |
| 2007 | Acura | TSX | Base |
| 2007 | Honda | Civic | Si |
| 2008 | Acura | TSX | Base |
| 2008 | Honda | Civic | MUGEN Si |
| 2008 | Honda | Civic | Si |
| 2009 | Honda | Civic | Si |
| 2010 | Honda | Civic | Si |
| 2011 | Honda | Civic | Si |
Engine Fitment
| Engine |
|---|
| Honda 2.0L/1998CC - 4 Cylinder (K20A2) |
| Honda 2.0L/1998CC - 4 Cylinder (K20Z1) |
| Honda 2.0L/1998CC - 4 Cylinder (K20Z3) |
| Honda 2.4L/2354CC - 4 Cylinder (K24A2) |
| Honda 2.4L/2354CC - 4 Cylinder (K24A2) |
Reviews
No Reviews Yet!
Write a Review