Eagle 94-01 Integra VTEC H-Beam Connecting Rods
All Eagle H-beam rods are forged from certified 4340 chromoly steel. While a lot of companies make rods from this material, if you pay close attention, you will notice not all 4340 is the same. For instance, to be classified as "4340 steel" certain alloying elements must be present in certain percentages. AISI/SAE specifications call for 1.65% to 2.00% nickel content. While this seems like a small difference, understand that this is almost an 18% variation. 4340 steel with 1.65% nickel will act a little differently than 4340 steel with 2.00% nickel content. This is just one of many alloying elements involved in creating 4340 steel. Through extensive material testing, Eagle works closely with the foundry we use to achieve a much tighter tolerance of all alloying elements to our specific requirements. Along with this, the heat treatment and tempering process used is vital to producing a stong steel. While exactly what we do is a closely guarded secret, all of this attention to detail results in a stronger and much more consistent material. Our "4340" steel routinely tests 10-15% stronger than "typical" SAE/AISI spec 4340 steel.
fasteners: 3/8" ARP 2000
torque: 43 ftlbs with ARP moly lube on threads
pin fit: bushed
recommended up to 900 HP need more? upgrade to
standard rod for B18C, B18C1, B18C5. Older design used 5/16" bolt (3/8" head) - torque was 28 ftlbs with moly lube.
Images may be for reference only
|Rod Weight In Grams:||535|
|Rod HP Rating:||900|
|Rod Bolts:||ARP 2000|
Be the first to review this product