Featuring a fully sealed carbon fiber airbox, high-flow S-FLO air filter, and precision-engineered aluminum MAF housing, the AWE S-FLO Intake System is designed to optimize airflow while maintaining consistent air metering and reliable engine operation.

The system features genuine 2x2 carbon fiber construction with UV-stabilized resin and a protective clear coat for lasting durability and a premium appearance. Its sealed airbox integrates with the factory inlet ducting, helping provide a consistent supply of fresh intake air while reducing exposure to engine bay heat.

Designed as part of AWE's modular intake platform, the carbon fiber airbox can be used with the factory turbo inlet tube or upgraded with the separately available AWE Carbon Turbo Inlet Tube. This flexibility allows enthusiasts to improve their intake system in stages while maintaining compatibility with factory engine components.

Whether upgrading a daily-driven Civic Type R or building a track-focused Integra Type S, the AWE S-FLO Carbon Fiber Intake System delivers improved breathing capability, premium construction, and the distinctive sound of a performance turbocharged engine.

Features

• Genuine 2x2 Carbon Fiber Construction: Premium carbon fiber airbox delivers lightweight construction, durability, and exceptional engine bay appearance.

• Fully Sealed Airbox Design: Helps isolate incoming intake air from excessive engine bay heat while utilizing the factory fresh-air inlet ducting.

• 85% Increased Filter Surface Area: Features significantly more filter surface area than the factory intake system to support improved airflow.

• High-Flow S-FLO Air Filter: Washable, oil-less performance air filter provides excellent filtration without requiring filter oil during maintenance.

• Precision-Engineered 80mm MAF Housing: Aluminum mass airflow sensor housing is designed to maintain consistent airflow across the factory sensor.

• Improved Intake Airflow: Performance-oriented design helps reduce intake restrictions and supports increased airflow to the turbocharger.

• Enhanced Turbocharger Sound: Produces a more pronounced turbo induction sound during acceleration and boost.

• UV-Stabilized Carbon Fiber Finish: Protective resin and clear coat help maintain the appearance of the carbon fiber components.

• Factory Turbo Inlet Compatibility: Includes an application-specific silicone coupler for connection to the factory turbo inlet tube.

• Modular Intake Design: Compatible with the separately available AWE Carbon Turbo Inlet Tube for additional airflow improvements.

• No ECU Tuning Required: Designed to operate with the factory ECU calibration.

• Direct Bolt-On Installation: Utilizes factory mounting locations for straightforward installation.

• AWE No Check Engine Light Guarantee: Backed by AWE's guarantee when properly installed and used as intended under the manufacturer's specified conditions.

• AWE Fitment Guarantee: Engineered for proper fitment in supported applications.

Popular Performance Applications

• Street Performance Builds: Improves intake airflow and enhances turbocharger induction sound while maintaining factory drivability.

• Honda Civic Type R FL5 Builds: Provides a premium carbon fiber intake upgrade for the factory turbocharged K20C1 engine.

• Acura Integra Type S DE5 Builds: Enhances the intake system with increased filter surface area and performance-oriented airflow characteristics.

• Naturally Aspirated-to-Turbo Performance Enthusiasts: Delivers the distinctive intake and turbocharger sounds associated with high-performance forced-induction engines.

• ECU-Tuned Applications: Supports modified engine configurations where improved intake airflow may complement appropriate ECU calibration.

• Track Day Applications: Provides a sealed performance intake solution for demanding driving conditions.

• Turbocharger Upgrades: Can be paired with compatible turbo inlet upgrades as part of a more comprehensive intake system.

• Engine Bay Appearance Upgrades: Genuine carbon fiber construction provides a premium motorsport-inspired appearance.

Additional Information

• Manufacturer: AWE Tuning
• Part Number: 2660-11115
• Product Type: S-FLO Carbon Fiber Intake System
• Airbox Material: Genuine 2x2 Carbon Fiber
• Airbox Finish: UV-Stabilized Resin with Protective Clear Coat
• Air Filter: Washable, Oil-Less S-FLO Performance Filter
• MAF Housing: Precision-Engineered 80mm Aluminum Housing
• Filter Surface Area: 85% Increase Over Factory
• Turbo Inlet Compatibility: Factory Turbo Inlet / AWE Carbon Turbo Inlet
• ECU Tuning Required: No
• Installation Type: Direct Bolt-On
• Emissions Compliance: Not Approved for Sale or Street Use in California

Vehicle Fitment:

• 2023+ Honda Civic Type R (FL5) – 2.0L Turbocharged K20C1

• 2024+ Acura Integra Type S (DE5) – 2.0L Turbocharged K20C1

Performance Information:

When paired with the complete AWE S-FLO Carbon Intake System, including the carbon fiber turbo inlet tube, AWE reports maximum dyno gains of 20 horsepower and 16 lb-ft of torque at the wheels using 91-octane software.

These figures apply to the complete intake configuration and should not be interpreted as guaranteed gains from the carbon airbox alone.

Important: Part number 2660-11115 is the carbon fiber intake/airbox configuration. The AWE Carbon Turbo Inlet Tube is available separately under part number 2660-11114.

Common Reasons for Replacement

• Restrictive Factory Intake System: Upgrading to a performance intake can provide increased airflow capacity compared to the factory configuration.

• Improved Turbocharger Response: Reduced intake restrictions may help improve turbocharger breathing and responsiveness.

• Enhanced Induction Sound: Provides a more pronounced turbocharger and intake sound during acceleration.

• Performance Engine Modifications: Supports intake airflow requirements associated with compatible performance upgrades.

• Turbo Inlet System Upgrades: Provides a modular foundation for adding the AWE Carbon Turbo Inlet Tube.

• Engine Bay Appearance: Genuine carbon fiber construction creates a premium performance-oriented appearance.

• Air Filter Serviceability: Washable, oil-less filter construction allows cleaning and reuse instead of routine disposable filter replacement.

• Track and Performance Preparation: Provides a purpose-built intake system for enthusiasts seeking improved airflow and reliable installation.

Installation Notes

1. Verify Vehicle Compatibility: Confirm that the vehicle is a supported Honda Civic Type R FL5 or Acura Integra Type S DE5 equipped with the factory-style K20C1 turbocharged engine configuration.

2. Allow the Engine to Cool: Ensure the engine and surrounding intake components have cooled before beginning installation.

3. Disconnect the Factory Intake Components: Carefully disconnect the factory intake tubing, mass airflow sensor connector, and associated mounting hardware.

4. Remove the Factory Airbox: Remove the original intake airbox and filter assembly following the appropriate factory service procedures.

5. Install the AWE Carbon Fiber Airbox: Position the replacement airbox using the designated factory mounting locations.

6. Install the S-FLO Air Filter: Ensure the performance air filter is properly seated and secured within the airbox.

7. Transfer the MAF Sensor: Carefully install the factory mass airflow sensor into the supplied 80mm aluminum MAF housing according to AWE's instructions.

8. Connect the Turbo Inlet: Install the appropriate silicone coupler to connect the intake assembly to the factory turbo inlet tube or compatible AWE inlet upgrade.

9. Secure All Connections: Tighten all clamps and mounting hardware according to the manufacturer's instructions.

10. Inspect Intake Sealing: Verify that the airbox, intake connections, and MAF sensor are properly installed without air leaks.

11. Reconnect Electrical Components: Confirm the MAF sensor connector and any other disconnected components are securely attached.

12. Verify Proper Operation: Start the engine, check for abnormal noises or warning lights, and inspect the intake assembly for proper clearance.

13. ECU Tuning: No ECU tuning is required for the supported intake configuration, although modified vehicles may benefit from professional calibration.

14. Professional Installation Recommended: Installation by an experienced automotive technician is recommended to ensure proper fitment and reliable operation.

Important: This product is not approved for sale or street use in California. Verify applicable emissions regulations before installation.

What's Included

• (1) AWE S-FLO Carbon Fiber Airbox Assembly

• (1) Washable, Oil-Less S-FLO Performance Air Filter

• (1) Precision-Engineered 80mm Aluminum MAF Housing

• (1) Application-Specific Silicone Coupler for Factory Turbo Inlet Compatibility

• Associated installation hardware and mounting components as supplied by AWE

Note: The AWE Carbon Turbo Inlet Tube (2660-11114) is sold separately and is not included with part number 2660-11115.

Upgrade your Honda Civic Type R FL5 or Acura Integra Type S DE5 with the AWE S-FLO Carbon Fiber Intake System (2660-11115) for improved intake airflow, enhanced turbocharger sound, and premium carbon fiber styling. Featuring a fully sealed 2x2 carbon fiber airbox, an oversized washable performance filter, and a precision-engineered 80mm MAF housing, this intake system delivers the quality, performance potential, and attention to detail expected from AWE Tuning. With direct bolt-on installation, factory ECU compatibility, and the ability to upgrade to AWE's carbon fiber turbo inlet tube, the S-FLO Intake System is an excellent foundation for your next K20C1 performance build.