Images may be for reference only
Product Details
| Part Number: | ACR-2850 |
| Brand: | Action Clutch |
| Transmission: | Manual |
Action Clutch's Stage 3 (1MS) Clutch Kit is designed to withstand even the most challenging conditions. Featuring a heavy-duty single diaphragm pressure plate, reinforced drive straps, and a Sprung MIBA Ceramic (available in a 4 or 6 puck) disc, this kit provides peak performance and extreme durability for low/mild horsepower vehicles. Our Sprung MIBA Ceramic clutch kit provides quicker engagement and will introduce some clutch chatter, which will minimize after proper break-in. For those looking to take their vehicles to the next level, the Stage 3 (1MS) Action Clutch Kit provides maximum control and power with little compromise on reliability.
Specifications:
- 170% Increased Holding Capacity Over Factory Kit*
- Heavy-duty Street Use And Occasional Drag / Road / Drift Racing
- This clutch kit is compatible with the factory Dual Mass Flywheel .
- Product Type: Stage 3 Clutch Kit (1MS)
- SFI: 1.1
Includes:
- Sprung MIBA Ceramic 6 Puck Disc
- Single Diaphragm HD Pressure Plate
- Pilot Bearing / Bushing (when applicable)
- Clutch Alignment Tool
- Conventional Release Bearing
Break-in Requirements
- 500 street miles / Keep RPM's under 4500, no more than half-throttle, no boost (if applicable).
- Proper break-in is required in order to retain product warranty, ensure longevity and holding capacity.
*Increase in holding capacity is rated in Crank Torque, not Wheel Torque
WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.
Vehicle Fitment
| Year | Make | Model | Trim | Notes |
|---|---|---|---|---|
| 2007 | Acura | TL | Type-S | Manual |
| 2008 | Acura | TL | Type-S | Manual |
Engine Fitment
Honda 3.5L/3471CC - 6 Cylinder (J35A8)
Reviews ★★★★★
No Reviews Yet!
Write a Review