Energy Suspension 02-06 RSX / 02-05 Civic Si Red Engine Mount Inserts Reviews

The energy suspension motor mount inserts work as expected and don

Great and fast shipping as always love u guys cant wait for more future purchases

Best upgrade for the price. These inserts will stop wheel hop and will help your raceheader from cracking, though a flexpipe might still suffer from cracks. I like the product.

Didn't completely stop all wheel hop but was a great improvement over stock. Worth every penny

Shits weak. Just buy the motor mounts

I bought these about 3 months ago and let me tell you they eliminated wheel hop, and engine movement is minimal. I notice allot of people complain about the vibrations, IMO at first they were pretty bad, but after a week or so they settled and arent as noticable to me anymore. I would recommend these to everyone!

You have to feel these things to believe it! No more wheel hop! Power feels much smoother and more instantaneous. For the price, you can't go wrong.

Nothing but great things to say about these inserts. Took away the engine movement and the vibration was minimal and even works with broken/ripped stock mounts. 100% recommend this product..speedy shipping and great customer service is why I always use K series parts.

This is a must if you love to spin tires and go. My engine does not move at all anymore and it feels like i am not losing power to the wheels anymore. This is the best aftermarket part i have bought. I do want to say that you have to take off your clutch slave cylinder to pull the front motor mount out. But it was very easy and way easy to put it back in. I love driving my car even more now. :D

Had these on now for about 2 months. Vibration at first is very noticeable but it gets a little better with time; these days I don't even notice it. Handling is much better and there is no wheel hop, I can peel out all the way through first and it feels smooth like I'm just floating along on a cloud, I actually have to be careful now because I've accidentally squeaked my tires a few times at intersections. Install is very easy, don't let it intimidate you. I was under the impression that I had to take half the damn undercarriage apart just to get at them, but you can see them right from under the car, only a few bolts and some wiggling to get the olds one out and the new ones in. All in all probably a 2 hour job. For $30 dollars you can't go wrong, the only downside is the vibration, but if you are like me and have your car heavily modded in the first place, the vibration at idle adds character to the car and is actually a positive.

These really helped with wheel hop when launching and make 2-3rd gear shifting smoother. 3 rd doesn't pop out anymore. Vibrations are somewhat annoying tho. Hope they ease up over time. Great product.

I just got these on yesterday and wow it took forever. I had to drop the sub frame to get the front mount off and on, and had to flatten the mounts to barely get them into the slots. In the end it was worth it so, you feel so much more than stock mounts and now I don't have the 3rd gear pop anymore. It also helped with my skunk2 exhaust from knocking on the frame and the cai does not move one bit now. These are the best thing I've done to my car yet. Oh and the take off vibration should go away after everything settles back down.

The difference before and after these inserts is like night and day. Sure the vibrations are there but the car drives SO much better. I would recommend these to anyone that wants more control from their car. Once you get the header off of the car it's smooth sailing. Only takes about 3 hours total. GREAT PRODUCT. Perfect fitment.

At first, I was a little iffy about installing the ESMM since I did not want excessive vibrations. But, I am so glad I did. It is a very straight forward install but was painful without the right tools. Make sure you have the right tools! The front mount was the hardest to remove and hardest to put back in. The rear just slid out and slid back in. After the install, I noticed a huge difference when starting up. Engine harmonics is much more prominent and sounds really good. The ESMM makes shifting and downshifting much more smooth. The vibrations in the cabin do not bother me. They actually feel really good. There is no rattling in the cabin. Its just vibration at idle and take off, like a massage chair on low. A must have for better performance.

This is a must if your running a race header.. vibrations arnt too bad i actually like the vibrations makes it feel like a race car...if your going with MAD power you might want to go with Hassport Mounts but for N/A this is PERFECT!

This product is probably the best $ for performance mod you can buy. Works great and I hardly notice it; even my wife isn't bothered by it.

Front inserts went in no problem but the rear inserts are ever so slightly too wide so it took a little extra effort to reinstall the mount. Absolutely loved the results, however, they did settle in after a few weeks so it doesn't feel as stiff as the first day, but I'm still very happy.

It does what it says. But all the vibration of the engine can't be absorbed by the motor mounts and it enters the cab. Great for track cars but not so good for street cars.

I installed these when I installed my RH. I'm very pleased with the results. The price is nice too! I was able to install my front mount without loosing anything else with a little wiggling. The rear one was really easy. I recommend these if you want less wheel hop and have a RH.

I ordered these inserts as the reviews were very good and was already going to easy access to install the front mount due to installing some other parts. Found the front OEM mount cracked and decided to only install the front mount inserts to correct this issue. Amazed at the difference! Shifting dramatically improved and engine movement/ wheel hop minimized. Not sure if I will even install the rear insert as I want to void excessive engine vibrations. $28

Had a very painful install. Air tools assisted greatly but getting bolt though rear with inserts in was very difficult, ended up having to take spring bolts off down pipe to get bolt though. Front was easier but still not exactly an easy install. So beware. Quite a bit of vibration first few weeks, but settled down. Still a bit at idle, especially when A/C on. For price however, very very good. Much stiffer and better for wheel hop than stock and much cheaper than full mounts.

They took me 4hrs to do when I was putting in my new front and back mounts. The install was easy! They make the engine feel so much more steady and their is no wheel hop at all. Also the vibrations are fun!

I read alot about esmm deciding if i should get them or not. now that I got them installed into my car, I love driving it even more! The vibrations are not that bad at all, best mod ever! Highly recommend. Thanks CRSX!

Eliminated the flexing of my motor! I also noticed a significant drop in the amount of wheel hop I get. This is a must have for people needing a stiff engine without spending the cash on new mounts. The vibration and sound felt inside the car feels great and makes the car funner to drive!

My car is a DD first drive was beautiful when installed. After that the vibrations settled down a tad. Only bad vibration is around 850-900ish rpm on take off. Idle vibration isnt too bad slightly annoying idle vibration with a/c on but it doesnt bother me at all. Good way to spend less than $30.

i could feel my motor moving like crazy when i was driving also have headers. put these in no more motor movent and no more header smacking my swaybar. excellent upgrade i recommend to all. Vibes feel good not bad at all.

I needed this along time ago. Virtual no wheel hop.

The Difference is Night and Day... Love Em

i pretty much i like these i can totally feel the difference, but i also will recomended the innovative mounts better if you got the money of course even if you dont have you car turbo or supercharge and on crsx they have a great price thank

All your bolt on mods are no good with wheel hop, for 27$ you can fix that problem. Vibrations are there, but nothing that will drive you nuts.

install with a lift wasnt too bad the front mount is a pain to get in but its nothing that cant be done wheel hope is very little but not 100% gone like it is for some ppl with i/h/e vibration is ok but a noticeable at idle when at a light other then that they are great car feels much smoother and is more responsive well worth the $27 with out a doubt!! they are a must if full mounts are out of your price range

WOW these were an ok install for me, id advise taking it to the shop personally for others, but major difference in driving, shifts sooo smooth, everything feels connected to the car, little vibration at idle but i think it's sweet, its not a crazy vibration, barely noticed it after a few weeks, also eliminated 100% of my wheel hop, car used to shake like crazy from the jump, but now nice and smooth and strong, best investment for so cheap, installing BC race header with BC spec 3 soon :-)

For something so cheap and simple, it does so much. The car feels tight, shifts smoothly, and does it all with only minimal vibrations. The vibrations are definitely noticeable, but having had them in for a month now, I barely feel them. For a DD looking to get the most out of the driving experience, these are a must!!!!!!

The BEST price on the entire internet, VERY fast shipping, ordered on a Monday and got them on Wednesday, you gotta love ClubRSX! Fairly easy to install when you have access to a lift. As for overall performance these things are great, it feels like a new car! The vibrations aren't bad as everybody says it is but one of the best mods I've bought. If you don't have any I recommend getting these ASAP!

These are worth the price. Rarely do I have problems with wheel hop now. Just a slight vibration at at idle but nothing to worry about, my hood did rattle but nothing you couldn't fix with a couple turns on the rubber hood adjusters to stop that. Definately recommend these to anyone that want to benefit from the functionality of these inserts, and there not even expensive, and a simple DIY part.

This is the inexpensive fix for a better ride, dont really need full mounts, when it was sent it shipped fast, came already greased and ready, very easy install, and its RED :D i recommend this to everyone for easier shifting, little stiffer ride, less wheel hop....just a light vibration not noticeable, but i think other people need to tighten bolts n screws to fix their noise

These mounts are great gave me the extra stiffness I needed after my swap would recommend them to anyone that doesnt want to do full solid mounts.

Install is really straight forward and took about 1.5 hours. I noticed a little more vibration in the car during idle which is expected, but nothing noticeable while driving. Car accelerates a lot smoother now and there is virtually no wheel hop. Great mod for the money.

fast shipping as always,very easy install. everything feels nice and stiff. shifting notch went away also, very smooth now. vibrations are not bad. feels kinda good on the back. cheap and very good investment for any rsx owner. crsx ftw!!

Did what they said, however, my hood rattles at idle. Starting from a stop makes a very loud shake of the engine. The vibrations at idle wouldn't be so bad except the hood rattle is so loud it sounds like there is something wrong with my engine. Very embarrassing.

I bought these about a yr ago. I just installed them last week along with a KRRH. THese things are AMAZING for the price of 2 bucks. My tranny was notchy before, and it got rid of the notchiness. Shifts alot smoother now. And some people talk about vibrations, but i barely feel any at all.

Bought this 2 weeks ago and just installed it about 5 days ago and I must say I wasnt sure what to expect with the vibrations everyone was talking about. But after the instal driving home felt like it was a different car, love this mad and vibration is not bad the ladies love it though..lol but yeah the engine feels so secure and no wheel hop.. def buy this best mod for your rsx. Don't think twice.

These motor mount inserts went into the front and rear mounts like they were molded out from my specific mounts. I was pleasantly surprised about the excellent quality in material as well, I would've easily paid over $50 for them... you simply cannot beat $27 shipped for a great supporting mod. Just be prepared to temporarily bend the harness retainer bracket by the fan shroud for the front mount to go back in, and unbolt the downpipe for the rear mount bolt to come out; besides that, install is a breeze just a little time consumming (follow directions carefully, torque bolts back to spec w/loctite). Absolutely the best bang-for-buck mod I've ever come across, I finally feel connected to the road and car with no other mods! (and it gets better with mods) Looks sexy in red plus the fact that I can instantly spot where they are is an added bonus. I would also like to commend ClubRSX for their fast shipping and ease of process/great communication. Tank you ClubRSX! I'll be doing more business with you shortly.

Just finished installing these, was the first mod i've done to the car. It took about 5 1/2 hours of work but only because it was a pain to get the mounts back in and lined up. Pretty straightfoward install space is just limited. The vibrations are not bad at all it feels like a massage chair. With the A/C on the vibrations increase a lot but I love it. Wheel hop is gone for sure the tires just spin :). For sure the best $27 i've ever spent. Buy them, you will NOT regret it.

at idle my car feels like a race car, it vibrates a little i love it. saving my dc rh too cant beat them for the price.

These are perfect! My tranny mount was shot and my front and back ones were starting to go. These held the motor fine until my new tranny mount came. I'm getting more for the new RSX even though the mounts are fine! Cheaper than new billet mounts and damn near as good. GET THEM AND SUPPORT CLUBRSX.COM!!!!!!!!!!

Cannot beat the price for the results. one of my favorite mods i have done. no more clunking of the race header :) easy install only took a few hours and that was taking my time. vibrates only at idle but i actually kinda like it lol almost like a massage chair.

This mod is definitely one of the best!! Vibrations are not that bad, only the seats vibrate a little bit more during idle. Absolutely a more solid feel of the whole car. No more wheel hop and very smooth shifting. It made me love my car more! :D seriously... should have done this as my first mod long long long time ago...

holy shit, these things make a HUGE difference. i was expecting the vibrations to be harsh and annoying, but i absolutely love it. its not bad, it just feels stiffer and tighter. this is probably the best $27 ive ever spent... and the install wasnt bad, except for the fact that i had a bolt snap off in the rear mount from it being rusted in there for so long... took 6-7 hours to drive it out. other than that, these are amazing

Fast and easy install.. They work great.. Good product... Satisfied with the purchase..

wow best 30 bucks spent. everything is nice and stiff. and no more vibration

jus put mine on...can u say, power to the ground...car sounds and feels sweet...vibration is nothing compared to my friends innovative 60a's which pawn all

Even on rough up and downshifts its wayyy smoother and virtually no wheel hop. There is a very slight vibration but its nothing like I expected it to be. I've heard something about A/C being on and vibrating more, to an extent thats true but again its nothing bad. These are helluva lot better than stock. Should've done this long long long ago. Appreciate it CRSX.

I love this mod. Heck, I even love the vibrations that come with them. I am using these in tandem with an engine torque damper and I have no more wheel hop. The install is not as complicated as most make it. I did it in an hour without removing anything except the mounts themselves.

Initially I was quite pleased with the product. Id say it took a total of 5 hours to install both inserts. The product definitely works! Shifting from 1-2 was definitely smoother and also when downshifting (previously there was a bit of a jerk that could be attributed to the engine rocking) The reason why I have decided to remove the product is that it has caused all sorts of rattles and vibrations. A vibration can be felt at idle that is not audible, which is the one I could live with. However, when acclerating in first gear (1-2k rpm) I have a buzzing/rattling noise, which is hella annoying. Also the engine sounds coarser with the inserts. Im going give the Ignalls torque damper a try to see if the same effect can be achieved without the noise and vibrations.

Installation is not straightforward, but isnt bad if you remove sway bar in the back. Car vibrates pretty good now, not too bad normally but with AC on its pretty bad. No wheelhop at all, now it just spins tires instead. Shifts are firmer, just looking at the motor you can tell it decreases travel quite a bit. For $27 you cant beat it, just be prepared for the vibrations.

I only installed on pair of inserts in the rear mount and that was enough to remove my wheelhop!! I'll install the front pair when I get time.

great product! install was a little tough but definitely worth it took about 2 hours or so. shifts feel better and throttle response as well and wheel hop is almost completely gone. vibrations are less than i expected only bad thing is idling with the a.c. on but definitely worth the money

Honesty i cant say it got rid of the wheel hop because i already had a ingalls torque damper. So its hard to notice the difference, definetly recomended getting it install by a pro, took me 3 hours installing it, with the diy forum found here at club rsx, uts a good product defitnetly recommend it, a must for some serious driving

Easy enough to put in, just make sure the bolt holes line up completely, or it's a PITA to fix. Gets rid of 95% of the wheelhop I have with i/h/rbc/exhaust/k-pro, still gets kind of bouncy near redline. The vibrations are bad at first, but bump up the idle to 950 if you can (K-pro), and in a few days you'll get used to it.

It was a bit tricky at first and took a few hours to put in. Best 30 dollars product ever. Wheel hop gone and the feel of the car is stiffen. Any RSX owner should buy.

bought these after a lot of research... I have a strup race header, these things dont allow it to rub on the sway bar during harsh driving conditions. they really limit the flex of the engine during a full throttle press!! a must have!!

Stiffens things up a bit. Over all its worth it for the price and is a simple install. Don't think about it just order it!

Prior to the inserts I had really bad wheel hop issues so I thought for $30 I would give them a chance. Now that I have these installed my dreaded wheel hop situation has been solved! They were a bit tricky to install without any pictures so it took about 3 hours

I have only installed the rear inserts and with just have the instal complete i can feel a huge difference! amazingly effective. There is vibration in the cabin area but i kinda like it.

This mod is awesome!I had myself saying this is the best 30 dollars ive spent ever. I noticed the differnce in stiffness and shifting right when i turned my car on.

good way to spend $30 no matter the discipline. auto-x, road racing, or rally, it will improve your ability as a driver.

I HAD THEM INSTALLED IN LESS THAN 40 MINS. MY 3 OF MY 4 OEM MOUNTS WERE TORN AND THESE HELPED OUT ALOT..BIG HELP.. A MUST BUY..

ended up using these because front motor mount tore so these made an easy replacement and fixed it all. easy install and work very well

The writeup for the install on this site was an excellent resource as the provided instructions were weak. The install went smooth w/ 1 other person. Definitely helped w/ my wheel hop issue @ higher rpm. Hope the shakes go away soon at idle though (break in). Moving is fine with no shake, and my shifts seem smoother now.

Improved sporty feel of the car, be weary, mold for rear mount was not updated for 2005 rsx-s, so I had to cut it to shape, and shave a 1/4 inch off each side with a belt sander. Also see threads for warning of going the transmission bolt method instead of dropping subframe.

I was suffering from really bad wheel hop prior to the install of the inserts. Install was very easy with common hand tools. Vibration was a little worse than I expected at first but after a couple weeks it's not so bad.(they break in). And no more wheel hop, much better shifts and feel.

I bought these because I was installing my race header. At first I was afraid of the vibration it would cause (because my friend's car vibrated like crazy after his went on) but to my surprise I barely noticed any vibration. My car felt a lot tighter and my shifts were considerably smoother. I'm extremely happy with these mounts and the install wasn't that bad (jack and jack stands essential)and price is just crazy!

Great and inexpensive product. Mended my torn front mount and greatly added performance. Only took an hour to install. Exceptional value.

best $27 ive spent on my car. big difference for little price. a+

For sure the best $27.00 you will ever spend on your car. They do cause some vibtration but you get used to it.

I was having an issue when turning the car left, but after I installed these it drives like a new car...best mod I've done to date....yes there is vibration but who cares it's not much more than before....

Theres no doubt these energy suspension motor mounts do exactly what there supposed to by diminishing wheel hop and controlling torque, however, whether or not the vibrations that come along with it are worth it is up to you. I do not recommend these motor mount inserts for daily driven cars. The vibration is very annoying and even embarrasing when others are riding with you.

Fairly easy install a notice in vibration when the AC is on but other than that noticeable stiffening in the car no wheel hop. Excellent product!!

Great product hardly noticed the increase in vibration inside the car. Starts up amazingly smooth. Put them on to pair with my MRRH and they are working great!

it's the best bang for you buck mod i have so far. for $27, and work somewhat like a racing mounts, you can't beat that. It also reduces wheel hops and even help torn mounts to last longer.

These inserts are amazing! Little to no wheel hop, and the engine stays really tight to the chassis. the vibrations are def there, but aren't nearly as bad as i thought they would be. I would purchase these again if i had the chance

I don't know what some of the fuss is about? These things work great! If you have an 05-06 I suggest you shave the rear mount so it slides in as easily as the front one. I didn't notice anymore "vibration" or "droning" than pre-install. I also have the Ingalls torque dampener and I have the other mount on the drivers side, window welded so my engine is very secure! I highly recommend this mod.

the mounts worked really well. I drive exactly like a teenager because I am one, so when I checked my mounts before I bought the mounts it turned out that I had already torn one. So good thing I bought these, because they make shifting like butter and she purrs at idle

for 27 dollars this will prevent your motor from destroying itself for years to come, totally worth it, makes the car feel as if it was a full blown track car!

Beware... you will get some pretty strong vibrations at idle. But other than that these are awesome! No more wheel hop even in the wet. I mean it will spin, but the harsh wheel hop is gone. The car is also much more responsive.

Couldn't believe how much of a difference these made. They fit perfectly, and were easy to install. I love this mod, and I'm glad I did it.

Right from the bat you feel how much stiffer these mounts made the car feel. It helps with shifting too. If your worried about vibration you may notice it for the first week but after that I forgot I even had them all together. Overall good buy especially to pair with a race header

They fit perfectly, which never seems to happen with aftermarket products. Great money spent.

I could not believe how much of a difference these inserts made. My car feels totally different. The overall handling of the car changed. My car shifts better and it even handles better. These inserts are a must for any modded car. The vibrations is not that bad. I noticed mine alot only when I had the ac running. Best 30 bucks I've ever spent on my car.

Best bang for the buck you can get. Eliminated my wheel hop. Vibrations not bad at all. Easy to install if you do it right.

Eliminated almost all my engine movement under load!

For the $ you spend, you CANNOT beat this item. it stiffens all the neccesary pieces, and gives you a much more "in control" feeling of the engine, shifts are crisp, engine torque is controlled, everything is better...and i thought i could NEVER go it alone, its honestly a VERY easy install, just need patience and a good socket set.

These inserts are awesome. The motor feels solid under a heavy load. They even work with a torn motor mount which I had found during my installation. Installing these isn't too bad as long as you have the right tools and patience!

After putting them on I fell in love instantly, shifts go in smooth no matter what rpm your at, nice aggressive feel when your on the highway and downshifting, also feels like it has better traction too. recomend this for anyone can't beat the price for what you get.

The ESMM really enhance the RSX's sporty feel- even shifting felt more precise. I only give it a 4 because the vibrations aren't for everyone and you'll get better performance from full mounts. Still, for only $27 shipped from ClubRSX, this is a tremendous amount of bang for your buck.

This was the first mod for my car, as even stock, wheel hop happens a lot. Makes the car feel much more solid. Transfers vibration to the interior, but it comes with the territory if you want to keep your motor from hopping itself into oblivion. Engine sits solid under all load. Definitely get them if you want to mod your car.

This product is a must! My DC5 is modded, (soon to be supercharged) and these inserts keep the motor from rocking back and forth keeping the wheels to the ground. NO WHEEL HOP AT ALL!!! Plus, SMOOTH SHIFTING!

I purchased these for my son's car which had been lowered and they were exactly what his car needed. We received them quickly too.