K-Tuned 06-15 Civic Si / 06-09 S2000 72mm Drive By Wire Throttle Body
Part Number: KTD-72D-RBC

Images may be for reference only

K-Tuned's 72mm Drive By Wire Throttle Body is direct bolt on to RBC/RRC manifolds and others with the same bolt pattern.

Features:

It is a true 72mm bore which is larger than ZDX throttle at the butterfly.
This throttle body requires some form of engine management (Flashpro or Ktuner) to properly manage the increased airflow.
We used the stock configuration and design using an OEM connector to avoid jumper harness.
This gives it an almost OEM look when installed.
Inside you will see the machined 72mm bore and brass butterfly.
There are two 1/8NPT vacuum ports on the bottom which can be used for evap, brake booster, or vacuum reference.
Included you will get a thermal gasket, mounting bolts, and two 1/8NPT plugs.
The inlet will use a 3" silicone coupler. You may need to change the coupler to match your intake.

Applications:

Notes:

WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.

Year	Make	Model	Trim
2006	Honda	Civic	Si
2006	Honda	S2000	Base
2007	Honda	Civic	Si
2007	Honda	S2000	Base
2008	Honda	Civic	MUGEN Si
2008	Honda	Civic	Si
2008	Honda	S2000	Base
2008	Honda	S2000	CR
2009	Honda	Civic	Si
2009	Honda	S2000	Base
2009	Honda	S2000	CR
2010	Honda	Civic	Si
2011	Honda	Civic	Si
2012	Honda	Civic	Si
2013	Honda	Civic	Si
2014	Honda	Civic	Si
2015	Honda	Civic	Si