Upgrade your sixth-generation Honda Accord with the Innovative Mounts Steel Replacement / Conversion Engine Mount Kit (20250), designed for 1998–2002 Honda Accord CG3/CG5 chassis applications equipped with compatible F-Series engines or 1998-and-newer H-Series engine configurations and a manual transmission.

Engineered to improve drivetrain stability, reduce excessive engine movement, and provide increased durability over aging factory rubber and hydraulic mounts, this performance-oriented mounting kit is an excellent upgrade for modified street cars, naturally aspirated performance builds, and forced-induction applications.

Factory Honda engine mounts are designed to isolate engine vibration and maintain passenger comfort. Over time, the original rubber mounting components can deteriorate, crack, or separate, while hydraulic mounts may lose their damping fluid. These conditions can allow excessive engine and transmission movement during acceleration, deceleration, and shifting.

Excessive drivetrain movement can contribute to wheel hop, inconsistent shifting feel, and unnecessary stress on surrounding components. These issues can become more noticeable when increasing horsepower, upgrading the clutch, or installing performance-oriented engine components.

Innovative Mounts addresses these concerns with heavy-duty steel mounting assemblies and specially engineered polyurethane bushings. Compared with conventional factory rubber and hydraulic mounts, polyurethane provides increased resistance to drivetrain movement while maintaining vibration isolation appropriate to the selected bushing hardness.

The Innovative Mounts 20250 includes three primary mounting assemblies and a driver-side mounting bracket. Together, these components replace the factory engine and transmission mounting arrangement in compatible manual-transmission Accord applications.

Each mount features Innovative Mounts' no-tear polyurethane bushing design, engineered to reduce excessive drivetrain movement while minimizing unnecessary binding. The increased rigidity can help improve drivetrain response and maintain more consistent engine positioning during aggressive acceleration and shifting.

The kit is CAD/CAM designed, stress analyzed, and engineered for bolt-on installation using compatible factory mounting locations and OEM hardware.

Important: Installation requires the appropriate F-Series timing belt-side engine post mount, Honda part number 11910-P0A-010, originally used in specified 1995–1998 Honda Odyssey and 1994–2002 Honda Accord F-Series applications.

The Innovative Mounts 20250 is also intended for supported 1998-and-newer H-Series engine configurations using the appropriate mounting arrangement. Earlier H-Series applications may require the alternative Innovative Mounts 20252 conversion mount kit.

Available with 75A, 85A, or 95A polyurethane bushings, the 20250 allows enthusiasts to select the appropriate level of drivetrain rigidity for their intended use.

Whether you're replacing worn engine mounts on your Accord, upgrading a naturally aspirated F23 build, or completing a compatible H-Series conversion, the Innovative Mounts 20250 provides a durable foundation for improved drivetrain stability and performance.

Features

• Three-Piece Replacement / Conversion Mount Kit: Includes the primary engine and transmission mounting assemblies.

• Driver-Side Mounting Bracket Included: Provides the required mounting arrangement for supported F-Series and 1998+ H-Series configurations.

• 1998–2002 Honda Accord Compatibility: Designed for compatible sixth-generation Accord CG3/CG5 chassis applications.

• F-Series Engine Compatibility: Engineered for supported factory-style F-Series engine configurations.

• 1998+ H-Series Compatibility: Supports compatible later H-Series engine configurations using the specified mounting components.

• Manual Transmission Specific: Designed for supported manual-transmission applications.

• Heavy-Duty Steel Construction: Durable steel mounting assemblies provide increased strength and drivetrain support.

• Direct Replacement Design: Replaces compatible factory engine and transmission mounting components.

• Bolt-On Installation: Designed around supported factory mounting locations.

• Uses OEM Hardware: Utilizes compatible original Honda mounting hardware.

• Reduced Engine Movement: Helps minimize excessive drivetrain rocking during acceleration, deceleration, and shifting.

• Improved Drivetrain Response: Firmer polyurethane bushings reduce unwanted mount deflection under load.

• Improved Shifting Consistency: Reduced drivetrain movement can help maintain more consistent engine positioning during gear changes.

• Reduced Wheel Hop: Helps control engine movement that can contribute to wheel hop during aggressive acceleration.

• No-Tear Polyurethane Bushings: Engineered for durability and controlled vibration isolation.

• Multiple Bushing Hardness Options: Available in 75A, 85A, and 95A configurations.

• No Hood Modifications Required: Designed for supported installations without trimming or notching the factory hood.

• CAD/CAM Designed: Developed using computer-aided design for accurate fitment.

• Stress Analyzed: Engineered for demanding street and performance driving conditions.

• Lifetime Manufacturer Warranty: Backed by Innovative Mounts' lifetime warranty, subject to manufacturer terms.

Popular Performance Applications

1998–2002 Honda Accord F23 Performance Builds

An excellent upgrade for sixth-generation Accord owners seeking improved drivetrain stability and reduced engine movement compared with worn factory mounts.

Naturally Aspirated F-Series Builds

Helps reduce unwanted drivetrain movement in modified F-Series engines equipped with performance intake systems, upgraded camshafts, headers, and exhaust modifications.

Turbocharged F23 Applications

Provides additional drivetrain support for compatible turbocharged F23 builds where increased torque places additional stress on the factory mounting system.

1998+ H-Series Engine Conversions

Suitable for supported later H-Series configurations installed in the sixth-generation Accord chassis using the required timing belt-side mounting arrangement.

Street Performance Builds

The 75A polyurethane bushing option provides increased drivetrain rigidity while retaining some vibration isolation for performance-oriented street vehicles.

Autocross and Track Applications

The 85A bushing option provides increased resistance to engine movement during aggressive acceleration, braking, and cornering.

Drag Racing Applications

The 95A bushing option offers maximum resistance to drivetrain movement for dedicated competition vehicles.

Factory Engine Mount Replacement

A performance-oriented alternative for replacing worn, cracked, or leaking original rubber and hydraulic engine mounts.

Additional Information

• Manufacturer: Innovative Mounts
• Part Number: 20250
• Product Type: Steel Replacement / Conversion Engine Mount Kit
• Mount Construction: Steel
• Bushing Material: Polyurethane
• Number of Mounts: 3
• Additional Bracket: Driver-Side Engine Mount Bracket
• Mounting Positions: Driver-Side Engine / Passenger-Side Transmission / Rear Engine
• Primary Vehicle Application: 1998–2002 Honda Accord
• Chassis Compatibility: CG3 / CG5
• Engine Compatibility: Honda F-Series / Compatible 1998+ H-Series
• Transmission Compatibility: Manual Transmission
• Installation Type: Bolt-On Replacement / Conversion
• Required Timing Belt-Side Engine Post: Honda 11910-P0A-010
• Hood Modification Required: No, for supported configurations
• Manufacturer-Listed Weight: Approximately 13 lbs
• Manufacturer Warranty: Lifetime Warranty, Subject to Manufacturer Terms

Individual Mount Components:

• 20210: Driver-Side Engine Mount

• 20210-SB: Driver-Side Mounting Bracket

• 20220: Passenger-Side Transmission Mount

• 20230: Rear Engine Mount

Honda OEM Replacement References:

• 50821-S84-A01: Driver-Side Engine Mount

• 50805-S84-A01: Passenger-Side Transmission Mount

• 50810-S84-A00: Rear Engine Mount

OEM references are manufacturer-listed cross-references. Verify the original mounting configuration before ordering.

Alternative H-Series Conversion Kit: Innovative Mounts 20252, for supported earlier H-Series engine configurations.

Available Polyurethane Bushing Hardness Options:

• 75A – Black: Street and performance configuration offering increased drivetrain rigidity. Manufacturer-recommended for approximately 250–400 HP.

• 85A – Gray: Track-oriented configuration designed to further reduce drivetrain movement. Manufacturer-recommended for approximately 400–500 HP.

• 95A – Red: Race-oriented configuration providing maximum resistance to drivetrain movement. Manufacturer-recommended for applications exceeding 500 HP.

Bushing Selection Note: Horsepower ranges are general manufacturer recommendations rather than guaranteed capacity limits. Actual bushing selection should consider engine torque, vehicle use, drivetrain configuration, and acceptable vibration levels.

Common Reasons for Replacement

• Worn Factory Engine Mounts: Aging rubber mounting components can deteriorate, crack, or separate, allowing excessive drivetrain movement.

• Leaking Hydraulic Engine Mounts: Factory hydraulic mounts may lose their damping fluid, reducing their ability to control engine movement.

• Excessive Engine Rocking: Unwanted engine movement during acceleration and deceleration can negatively affect drivetrain response.

• Engine Movement During Shifting: Firmer polyurethane bushings help maintain more consistent drivetrain positioning during gear changes.

• Wheel Hop During Acceleration: Reduced drivetrain movement can help minimize conditions that contribute to wheel hop.

• High-Horsepower F-Series Builds: Increased engine torque places additional demands on factory mounting components.

• H-Series Engine Conversion: Provides the required mounting arrangement for supported later H-Series engine configurations.

• Improved Drivetrain Response: Reduced mount deflection provides a more direct connection between engine output and vehicle movement.

• Improved Shifting Consistency: Reduced engine movement can help maintain more consistent shifting feel under load.

• Coordinated Mount Replacement: Replacing all three primary mounting locations together helps eliminate unwanted movement caused by deteriorated factory components.

• Street and Track Performance: Improve drivetrain stability during demanding driving conditions.

Installation Notes

1. Verify Vehicle Compatibility: Confirm that the vehicle is a supported 1998–2002 Honda Accord CG3/CG5 chassis.

2. Confirm Engine Configuration: Verify that the vehicle uses a compatible F-Series or 1998-and-newer H-Series engine.

3. Verify Transmission Type: Innovative Mounts 20250 is designed for compatible manual-transmission applications.

4. Confirm Required Timing Belt-Side Engine Post: Installation requires Honda part number 11910-P0A-010, used in specified F-Series applications.

5. Check Earlier H-Series Applications: Older H-Series engine configurations may require Innovative Mounts 20252 instead of 20250.

6. Support the Engine and Transmission: Properly support the drivetrain before removing the original mounting components.

7. Remove the Factory Engine Mounts: Follow the appropriate Honda service procedures when removing the original mounting assemblies.

8. Inspect Factory Mounting Locations: Check the chassis mounting points, engine brackets, transmission brackets, and surrounding components for damage or excessive wear.

9. Install the Driver-Side Engine Mount: Position the Innovative Mounts 20210 assembly according to the manufacturer's instructions.

10. Install the Driver-Side Mounting Bracket: Position the included Innovative Mounts 20210-SB bracket in the designated mounting location.

11. Install the Passenger-Side Transmission Mount: Position the Innovative Mounts 20220 assembly according to the manufacturer's instructions.

12. Install the Rear Engine Mount: Position the Innovative Mounts 20230 assembly in the designated rear mounting location.

13. Reuse Compatible OEM Hardware: The kit is designed to utilize factory mounting hardware. Inspect all original bolts and fasteners before reuse.

14. Align the Drivetrain: Ensure the engine and transmission are properly positioned before final tightening to prevent unnecessary bushing preload.

15. Torque Mounting Hardware: Tighten all fasteners according to Innovative Mounts' installation instructions and applicable Honda service specifications.

16. Verify Component Clearance: Inspect clearance around the engine, transmission, exhaust system, intake components, axles, and surrounding chassis structure.

17. Select the Appropriate Bushing Hardness: Choose the polyurethane durometer that best matches the vehicle's horsepower level, intended use, and acceptable vibration.

18. Expect Increased Engine Vibration: Performance polyurethane mounts generally transmit more vibration into the chassis than factory rubber or hydraulic mounts. Higher-durometer bushings typically increase vibration further.

19. Inspect After Installation: Recheck mounting hardware, drivetrain alignment, and surrounding component clearances after the initial driving period.

20. Professional Installation Recommended: Installation by an experienced Honda technician or performance automotive specialist is strongly recommended.

21. Confirm Fitment Before Bolting Down: Innovative Mounts states that mounts showing installation bolt impressions cannot be returned or exchanged. Verify all mounting requirements before installation.

What's Included

• (1) Driver-Side Engine Mount – Innovative Mounts 20210

• (1) Driver-Side Mounting Bracket – Innovative Mounts 20210-SB

• (1) Passenger-Side Transmission Mount – Innovative Mounts 20220

• (1) Rear Engine Mount – Innovative Mounts 20230

• (1) M12 x 1.25 x 100 mm Mounting Bolt

• (2) Aluminum Washers

• (1) 12 mm Washer

• (1) 12 mm Nut

• Polyurethane Bushings in the Selected Durometer

Important: This product is a three-mount, one-bracket replacement / conversion kit, not a complete engine swap package.

The Honda 11910-P0A-010 timing belt-side engine post mount is required and is not identified as part of the kit contents.

Compatible factory mounting hardware is reused where specified.

Upgrade your sixth-generation Honda Accord with the Innovative Mounts Steel Replacement / Conversion Engine Mount Kit (20250), engineered for 1998–2002 CG3/CG5 chassis applications equipped with compatible F-Series or 1998-and-newer H-Series engines and manual transmissions.

Featuring heavy-duty steel construction, Innovative Mounts' no-tear polyurethane bushings, three replacement engine mounts, and a driver-side mounting bracket, this kit provides improved drivetrain stability, reduced engine movement, and more consistent driving response.

Whether you're replacing worn factory mounts, upgrading a naturally aspirated F23-powered Accord, building a turbocharged F-Series performance vehicle, or completing a compatible H-Series engine conversion, Innovative Mounts delivers the strength, durability, and drivetrain control enthusiasts demand.