Engineered to provide improved drivetrain stability, reduced engine movement, and increased durability compared with factory rubber and hydraulic engine mounts, this performance replacement kit is an excellent upgrade for daily-driven vehicles, modified street cars, and dedicated high-horsepower K-Series builds.

Factory Honda and Acura engine mounts are designed primarily for passenger comfort and vibration isolation. Over time, the original rubber and hydraulic mounting components can deteriorate, crack, leak, or separate, allowing excessive engine movement during acceleration, deceleration, and shifting.

This unwanted movement becomes particularly noticeable in modified K24 applications where increased horsepower and torque place additional stress on factory mounting components. Excessive drivetrain movement can contribute to wheel hop, inconsistent shifting feel, and unnecessary stress on surrounding engine and transmission components.

Innovative Mounts addresses these limitations with heavy-duty steel mounting assemblies, precision-engineered mounting brackets, and specially developed polyurethane bushings. The upgraded system helps maintain more consistent engine and transmission positioning under load, reducing drivetrain deflection and providing a more direct driving experience.

The Innovative Mounts 10751 includes replacement mounts for the front, rear, and passenger-side engine mounting positions, providing a coordinated mounting upgrade rather than replacing only one worn factory component. The included engine block mounting bracket and billet accessories are engineered to provide the correct mounting arrangement for compatible Accord and TSX K-Series applications.

Unlike factory fluid-filled mounting components, Innovative Mounts utilizes performance-oriented polyurethane bushings designed to minimize unwanted drivetrain movement while retaining vibration isolation appropriate to the selected bushing hardness.

Each mount is CAD/CAM designed and stress analyzed for strength, durability, and precise fitment. The kit is designed to reuse applicable factory mounting hardware and does not require hood trimming or notching.

Available in multiple polyurethane bushing hardness options, the Innovative Mounts 10751 allows enthusiasts to select the appropriate balance between everyday driving comfort and performance-oriented drivetrain rigidity.

Whether you're replacing worn engine mounts on your Honda Accord K24, improving drivetrain stability in your Acura TSX, or preparing a high-horsepower K-Series engine for turbocharged or supercharged performance, the Innovative Mounts 10751 provides the strength, durability, and drivetrain control needed for demanding applications.

Features

• Complete Three-Mount Engine Mount Kit: Includes replacement mounts for the front, rear, and passenger-side engine mounting positions.

• Heavy-Duty Steel Construction: Durable steel mounting assemblies engineered for improved strength and long-term performance.

• K-Series Engine Compatibility: Designed for compatible K24-powered Honda Accord and Acura TSX applications.

• Manual and Automatic Transmission Compatibility: Supports compatible factory manual and automatic transmission configurations.

• Factory Replacement Design: Engineered to replace the original mounting system while maintaining proper drivetrain positioning.

• Improved Drivetrain Stability: Helps maintain consistent engine and transmission alignment under load.

• Reduced Engine Movement: Minimizes excessive engine rocking during acceleration, deceleration, and shifting.

• Improved Drivetrain Response: Firmer polyurethane bushings reduce unwanted drivetrain deflection.

• Reduced Wheel Hop: Helps control drivetrain movement that can contribute to wheel hop during aggressive acceleration.

• Innovative No-Tear Polyurethane Bushings: Specially engineered for durability and vibration control.

• Hydraulic Mount Replacement: Eliminates factory fluid-filled damping components in applicable mounting locations.

• Multiple Bushing Hardness Options: Available in 60A, 75A, 85A, and 95A configurations.

• Engine Block Mounting Bracket Included: Provides the required mounting arrangement for the K-Series engine.

• Billet Mounting Accessories: Includes application-specific billet crowns, aluminum washers, and mounting components.

• No Hood Modifications Required: Designed to install without trimming or notching the factory hood.

• Factory Hardware Compatibility: Reuses applicable original Honda/Acura mounting hardware.

• CAD/CAM Designed: Developed using computer-aided design for accurate fitment and manufacturing consistency.

• Stress Analyzed: Engineered for demanding street and performance driving conditions.

• Lifetime Manufacturer Warranty: Backed by Innovative Mounts' lifetime warranty, subject to manufacturer terms.

Popular Performance Applications

2003–2007 Honda Accord K24 Performance Builds

An excellent upgrade for Accord owners seeking improved drivetrain stability and reduced engine movement compared with deteriorated factory mounts.

2004–2008 Acura TSX Performance Upgrades

Provides improved engine and transmission support for K24A2-powered Acura TSX applications, helping minimize unwanted drivetrain movement during aggressive acceleration.

Naturally Aspirated K24 Builds

Suitable for K24 engines equipped with performance intake manifolds, upgraded camshafts, exhaust systems, engine management, and other naturally aspirated modifications.

Turbocharged K-Series Applications

Provides firmer drivetrain support for compatible turbocharged K24 builds where increased torque places additional stress on factory mounting components.

Supercharged K24 Performance Builds

Helps control excessive engine and transmission movement in compatible supercharged applications producing increased horsepower and torque.

Street Performance Applications

The 60A and 75A polyurethane bushing options allow drivers to select a balance between everyday comfort and increased drivetrain rigidity.

Track and Autocross Builds

Higher-durometer polyurethane bushings help maintain more consistent drivetrain positioning during aggressive acceleration, braking, and cornering.

Drag Racing Applications

The available 85A and 95A bushing configurations provide increased resistance to engine movement during hard launches and high-load shifting.

Factory Engine Mount Replacement

An excellent performance-oriented alternative for replacing multiple worn, cracked, or leaking original engine mounts.

Additional Information

• Manufacturer: Innovative Mounts
• Part Number: 10751
• Product Type: Steel Replacement Engine Mount Kit
• Mount Construction: Steel
• Bushing Material: Polyurethane
• Number of Engine Mounts: 3
• Mounting Positions: Front / Rear / Passenger Side
• Primary Vehicle Applications: 2003–2007 Honda Accord 2.4L / 2004–2008 Acura TSX 2.4L
• Chassis Compatibility: Honda Accord CM5/CM7 / Acura TSX CL9
• Engine Compatibility: Honda K-Series 2.4L
• Transmission Compatibility: Manual / Automatic
• Installation Type: Factory Replacement
• Hood Modification Required: No
• Factory Hardware: Reused Where Applicable
• Approximate Manufacturer-Listed Kit Weight: 16 lbs
• Manufacturer Warranty: Lifetime Limited Warranty

Individual Mount Components:

• 10720: Passenger-Side Engine Mount Assembly

• 10721-SB: K-Series Engine Block Mounting Bracket

• B10721: Aluminum Mounting Spacer

• 10731: Rear Engine Mount

• 10741: Front Engine Mount

Additional Mounting Accessories:

• 10750-AW: Billet Aluminum Mounting Crowns

• Application-Specific Aluminum Washers

• Mounting Bolts, Nuts, and Washers

Available Polyurethane Bushing Hardness Options:

• 60A – Red: Street-oriented configuration offering the greatest vibration isolation of the available options. Recommended for drivers prioritizing everyday comfort.

• 75A – Black: Street and performance configuration offering increased drivetrain rigidity. Manufacturer-recommended for approximately 250–400 HP.

• 85A – Gray: Track and performance-oriented configuration designed to reduce drivetrain movement. Manufacturer-recommended for approximately 400–500 HP.

• 95A – Red: Race-oriented configuration designed for maximum drivetrain control. Manufacturer-recommended for applications exceeding 500 HP.

Bushing Selection Note: Horsepower ranges are general manufacturer recommendations rather than guaranteed capacity limits. Actual selection should consider engine torque, vehicle use, drivetrain configuration, and acceptable vibration levels.

Common Reasons for Replacement

• Worn Factory Engine Mounts: Aging rubber and hydraulic mounts can deteriorate, crack, leak, or separate, allowing excessive drivetrain movement.

• Leaking Hydraulic Mounts: Factory fluid-filled mounting components can lose their vibration-control characteristics when damaged.

• Excessive Engine Rocking: Unwanted engine movement during acceleration and deceleration can negatively affect drivetrain response.

• Engine Movement During Shifting: Firmer polyurethane bushings help maintain more consistent engine positioning during gear changes.

• Wheel Hop During Acceleration: Reduced drivetrain movement can help limit conditions that contribute to wheel hop.

• High-Horsepower K24 Builds: Increased engine torque places additional stress on factory mounting components.

• Broken or Damaged Mount Bushings: Replace deteriorated factory rubber mounts with durable polyurethane components.

• Improved Drivetrain Response: Reduced mount deflection provides a more direct connection between engine output and vehicle movement.

• Coordinated Mount Replacement: Replacing multiple mounts together helps eliminate unwanted movement caused by deteriorated factory components.

• Street and Track Performance: Improve drivetrain stability during demanding driving conditions.

• Long-Term Drivetrain Maintenance: Replace aging original engine mounts with a performance-oriented mounting system.

Installation Notes

1. Verify Vehicle Compatibility: Confirm that the vehicle is a compatible 2003–2007 Honda Accord 2.4L or 2004–2008 Acura TSX equipped with a supported K-Series engine.

2. Confirm Engine Configuration: This kit is designed for K-Series four-cylinder applications and is not intended for factory J-Series V6 configurations.

3. Verify Transmission Compatibility: Confirm the vehicle uses a compatible factory manual or automatic transmission.

4. Support the Engine and Transmission: Properly support the drivetrain before removing the factory engine mounts to prevent unexpected movement or damage.

5. Remove Existing Engine Mounts: Follow the appropriate Honda or Acura service procedures when removing the original front, rear, and passenger-side mounting components.

6. Inspect Factory Mounting Locations: Check the chassis mounting points, engine brackets, transmission brackets, and surrounding components for damage or excessive wear.

7. Install the K-Series Engine Block Bracket: Position the supplied 10721-SB mounting bracket and B10721 spacer according to Innovative Mounts' installation instructions.

8. Install the Passenger-Side Engine Mount: Position the Innovative Mounts 10720 assembly and associated mounting components, ensuring correct orientation and alignment.

9. Install the Rear Engine Mount: Position the Innovative Mounts 10731 assembly in the factory rear mounting location.

10. Install the Front Engine Mount: Position the Innovative Mounts 10741 assembly in the factory front mounting location.

11. Install the Billet Mounting Accessories: Use the supplied aluminum crowns, spacers, and washers in the designated locations according to the manufacturer's instructions.

12. Inspect Factory Hardware: Examine original Honda/Acura mounting bolts and fasteners before reuse where specified.

13. Install Supplied Hardware: Use the included application-specific mounting hardware in its designated locations.

14. Align the Drivetrain: Ensure the engine and transmission are properly positioned before final tightening to prevent unnecessary bushing preload.

15. Torque Mounting Hardware: Tighten all fasteners according to the applicable Honda/Acura and Innovative Mounts specifications.

16. Verify Component Clearance: Inspect clearance around the engine, transmission, exhaust system, intake components, and surrounding chassis structure before operating the vehicle.

17. Select the Appropriate Bushing Hardness: Choose the polyurethane durometer that best matches the vehicle's horsepower level, intended use, and acceptable vibration.

18. Expect Increased Engine Vibration: Performance polyurethane mounts generally transmit more engine vibration into the chassis than factory rubber or hydraulic mounts. Higher-durometer bushings typically increase vibration further.

19. Inspect After Installation: Recheck mounting hardware, drivetrain alignment, and surrounding component clearances after the initial driving period.

20. Professional Installation Recommended: Installation by an experienced Honda/Acura technician is strongly recommended.

21. Confirm Fitment Before Bolting Down: Innovative Mounts states that mounts showing installation bolt impressions cannot be returned or exchanged. Verify all mounting requirements before installation.

What's Included

• (1) Front Engine Mount – Innovative Mounts 10741

• (1) Rear Engine Mount – Innovative Mounts 10731

• (1) Passenger-Side Engine Mount – Innovative Mounts 10720

• (1) K-Series Engine Block Mounting Bracket – 10721-SB

• (1) Aluminum Mounting Spacer – B10721

• (2) Billet Aluminum Mounting Crowns – 10750-AW

• (2) Aluminum Washers

• (2) M12 x 1.25 x 30 mm Bolts

• (4) 12 mm Washers

• (3) 12 mm Nuts

• Polyurethane Bushings in the Selected Durometer

Important: The Innovative Mounts 10751 is a three-mount replacement kit, not a universal K-Series engine swap kit. It includes the front, rear, and passenger-side engine mounts along with the application-specific brackets and mounting accessories.

Original Honda/Acura hardware is reused where specified. Verify the current manufacturer packaging contents before installation.

Upgrade your Honda or Acura K-Series drivetrain with the Innovative Mounts Steel Replacement Engine Mount Kit (10751), engineered for compatible 2003–2007 Honda Accord 2.4L and 2004–2008 Acura TSX applications equipped with K24 engines and manual or automatic transmissions.

Featuring heavy-duty steel construction, Innovative Mounts' no-tear polyurethane bushings, precision mounting accessories, and multiple bushing hardness options, this complete three-mount replacement kit provides improved drivetrain stability, reduced engine movement, and more responsive power delivery.

Whether you're replacing worn factory engine mounts, upgrading your daily-driven Accord K24, or building a high-performance Acura TSX, Innovative Mounts delivers the strength, durability, and drivetrain control enthusiasts demand.