Innovative 02-06 RSX / 02-05 Civic Si Motor Mount Kit: 75A Street Reviews

Great product...

The mounts seem to be made well but i ordered 75a which said "steet" and they vibrate the crap out of my car im hoping they break in soon i feel like its making everything come loose on my car.. my headlights bolts came loose and even my oil cap unscrewed.

Shipping was fast and good. The one issue that I had, and it was a misunderstanding on my part, is that this DOES NOT include the transmission mount. That's a separate piece. This is only the front, rear, and passenger side mounts. It would have also been nice to have some instructions with torque specs, so you wouldn't have to look it up in the shop manual. Great outside of that

I ordered the entire set of 4. I got tired of going thru cheap quality mounts and even the OEM style were not holding up as good as they used to on stock mods. There is a rough idle but when you drive it enough you get used to it, plus my idle was rough anyhow due to a bad sensor on the intake at the time of install. The install was not as easy as I'd planned for but - Happy and satisfied with the quality, performance, and price. Worth it to me.

I ordered the 75A version these along with the front mount because my passenger mount broke and the car was rattling like crazy. This is no joke: your car is going to be LOUD with these! But it drives so much better in all ways. More power gets to the ground and there is no wheel hop. You can drive a lot faster because the car is more secure. I also installed a Stage 2 clutch and I am really glad I put the mounts in first because the clutch would rip the motor right out of the car!

I had the mounts for over 2years and the 60a rear tends to rip beware your better off getting 75a

Easy to install, vibrations suck until you fix the dashboard/glove box rattles. Ordered the front mount along with this set and easiest way to install is to have it up on a lift and drop the subframe down slightly with some tranny jacks.

This mounts make the car vibrate for sure which some times is really annoying!!! However, I give this mounts five stars because they do an amazing job holding the engine. You will definitively feel a big difference in performance. Wheel hop what!? If you want to get rid of that nasty wheel hop, don't think twice about getting these mounts.

Great mounts. Engine feels very firm. They made my car vibrate alot but after a while it toned down.

my car shook like a rocket about to take off at stop lights but after about 2 weeks that went away a little bit, now it just vibrates a little. real nice mounts though

I was hesitant to buy these because of how other people made it seem as if the car would be unbearable to drive especially when its a daily driver. Once I gave in and bought these mounts and installed them, wow! No where near how other people have said it would be. Especially after driving around for awhile. Nice feed back from the engine under heavy throttle. Recommend these over stock any day!

if u want a real header u need real mounts. kinda a pain to install urself but....what a difference. stock mounts can crack but these have no testing limit

Very good set of mounts, would reccomend to anyone

I had really bad mounts they were gone they were to the point they caused damaged to my invidia cat back exhaust ever since I bought them no more problems Get themm if u stock

Like most I bought these because one of my mounts broke. It does feel much more firm and as my ex put it "Feels like a racecar!" If you performance is more important than comfort and noise to you than definitely upgrade your mounts. I'm a bit dissapointed that I have to pay over $100 for the front mount alone. Overall I'm glad I purchased these (knock on wood)

don't be afraid! these mounts start off stiff, but really tone down after several hundred miles. i also got the front mound. altogether, definitely improve the driving feel and power response to the ground. not vibration-free (!)

I bought these because one of my mounts went bad so i decided to just buy the whole kit. Once they were installed wow what a huge difference. vibration was pretty rough at first then i noticed my tranny was'nt aligned straight. after i got that fixed the vibration was basically gone. highly recommend these if your going to be building power!

huge difference, 1st day I had them installed and puched it to on an off ramp, got torque steer. power transfer is better and great feel.. little to no wheel hop. LOL bought these 4 years ago and they still are in excellent condition

Just got these mounts installed today, and they feel great. Vibration isn't so bad. Now, I can be going 50mph and drop it into 2nd gear no problem. No slamming when shifting gears hard. These mounts are a must once u realize how crappy the stock mounts hold up.

Once these were installed, it resolved steering wheel vibrations and gas pedal vibrations. This is my first mod to an 03 Type S and there is significant improvement in handling, grip, and just raw performance. There is no lag when shifting gears... The car just goes. But I think I'm going to swap to the 75A Mounts because the 60A over time, loses that initial feel of just raw performance.

Solid mounts, takes abuse and asks for more, but vibrates everything loose. Only rec. for track use, daily driving will drive you mad, trust me! I'm going back to the 60A street mounts.

Great customer service and fast shipping. These do vibrate a little, but I knew that before buying. All three of my factory mounts were torn, so this is a great improvement.

My old mounts busted so I went with these. Very easy to install and I can tell a difference...would recommend these mounts to anyone!

vibration is not bad... just wen the ac is on.. overall satisfied

I deffinately enjoy these mounts. I had the ESMM's before these, and I gotta say these are way better. When I had the ESMM's everything in my car shook violently. It was horrible. There are some slight vibrations and increased cabin noise, but nowhere near the amount produced by the cheap ESMM's. I purchased the 60a's and love em. They do the job(no wheel hop or sloppy engine movement)but do it through better a better quality product. My advise save up for the real thing! Skip ESMM's or you WILL regret it!

Took all of 30 minutes to install. While coming from ESMM I noticed alot less vibration, almost comparable to stock. The Only vibration i noticed is below 700Rpms which is also very minimal. Fast shipping from CRSX as always. A+ Quality and Fitment.

I'm by no means a track guy and I don't want my car to be a track car either. I do how ever want the performance without sacrificing comfort in my vehicle. I paid to have the mounts installed, and it was worth it. The vibrations did worry me the first time I started the car up, but they are not bad by any means. They do take away that lagging effect you feel in between shifting gears which is nice. Next step install race header.

Very awsome product hardest one is the front but got eventually on. Slim to non of rattles but will cause your dash and seats to vibrate at idle but who cares because NO WHEEL HOP!!!

On the upside, my RSX feels way more responsive and shifts crisp. On the down side, It vibrates more than a tractor trailer. I hear the vibrations subside after a few weeks, but I've had them for a month and it still feels the same. If you can live with the noise and vibration, you will love the performance, if not, get ESMM inserts instead.

I put these on about a month ago and the ride while driving is nice. It deffinately puts all power to the ground, but the vibration at a standstill is quite anoying. Everything rattles, I was hoping it would go away when broken in but it has not and I only have the 60a. If you don't mind rattles it is great.

Great traction, no wheelhop, solid engine. Just the car vibrates and my fiance hates it lol.

I bought my mounts awhile back and just got to installing them today. They are perfect! Cars running so hard now, no wheel hop and I guess I am of a small percentage of lucky few who can say that I have absolutely no interior rattles after install. Vibrations are normal and fine, my vibrations where actually worse before I installed the new mounts, 3 months of driving with 3 cracked mounts. Definitely buy these mounts if looking for good quality.

I say shaky, because I purchased these a few months back, and despite what I read in the forums about the vibrations and rattles getting weaker with age, mine seem to stay the same, if not intensify. I love the performance gains I saw through them, which was the elimination of torque steer and wheel hop, but not happy with how much they rattle the car. All in all, if you are wanting the comfort of a daily driver out of your acura, don't get this. If you want the raw performance gains, then this is a great mod.

they were kind of difficult to get out and put into place not beginners thing to do but yep....... shakes a lot i put them on like 2 weeks ago and the vibration has settled a bit but it is still there... I advise not to buy if you dont like vibrations ,, but for me i dont mind the cons cause the pros for me out weight them .... started a real race from a dig 3 times it was good significant decrease in wheel hop

A lot better then the stock mounts. The steering wheel and dash vibrate when idling. No more wheel hop.

After installing the 60A mounts (plus front mount) my motor is very secured. I feel like they were worth every penny I paid for them. Pros: -Better traction (Better 0-60 :D) -Less Wheel Hop -Secured engine (I can relax knowing that my 106k mile motor is more secured) - I can hear my engine better inside the car. Cons: -Not an installation for beginners. -Too much vibration after the mounts are first put in. (I'm sure they will loosen up after more time) 5 Stars because the mounts did exactly what they were designed to do. If you drive your RSX daily i beg you not to go over the 60A mounts. I'm very happy with the results and I'd recommend these to everybody looking for the same results. Increasing traction and HP utilization are very important factors when upgrading your RSX.

I have had the 60a's on for a few weeks. they look great and are solid. minimal vibs but over all not to bad.

great product, if you have aftermarket headers, this product will eliminate the rattling and it will stop the header from hitting the undercarriege.this is a must have.

I have full Innovative motor mount, engine feels more solid and greatly improved my launch. Not soo much noise, great for street and ideal for weekend track.

I installed this kit along with the front mount. my front mount was broken so it made an absolutely huge difference. there is no wheel hop. even when launching on wet pavement with winter tires. these are a great addition to my car. the vibrations aren't that bad and mine aren't even broke in yet.

Coming from having three broken mounts to having the Innovative Mount Kit inclunding the front mount, I noticed a huge difference in many areas, for one the vibrations were a bit extreme at first but after a couple weeks it is barely noticable. The sound of the motor also got louder, and she screams in v-tec! and whenever i want to drop the hammer, it doesnt take any time at all to shred!

Running the 75A mounts all the way around. Lots of noise and vibration the first couple of weeks, but now that my 3" exhaust is on, I barely notice the sound from the mounts. Car feels a lot stiffer and loves to launch off the line now. Perfect for my daily driver that will see a few trips to the track a year.

This Product is Great Install was Easy and Felt The Difference from stock Mounts Feels Like a Race Care,a Little Viberation but not too much,Motor Feels Solid Now,everybody Should Get them

Purchased the 60A Street Kit. I think they are fine for a daily driver.Wheel hop is greatly reduced, if not eliminated. Cabin vibrations and rattles are more noticeable, so it would be good to fix them after installing these mounts. You will definitely be surprised by the sound(maybe in a positive way) and vibration after install. However, it does get better the more you break them in. After a month, they are only noticeable at low rpm(idle), which can be fixed with k-pro.

Great fix might vibrate a bit, but, the way the car feels after is SOLID! It allowed me to feel the road better and I felt as is if I was in alot more control of the car. I have these 85A's all around (including front mount). Deffinitely worth the money for anyone looking for better traction, more positive feel and control.

TRANNY MOUNT CAME WARPED BUT NOT A BIG ISSUE. OVERALL, GREAT PRODUCT. BIG THANKS TO CLUB RSX AND VUONGS GARAGE IN GWINNETT GA.

Wheel hop is almost 100% gone. Vibrations are noticeable but after you break them in it's almost imperceptible. Now i just need to worry about wheelspin!

these made my car finally trully feel like a race car haaappppppppppppyyyyyyy

Great product, absolutely no engine flex which is what I want considering I will be using my car on the track. The car feels super solid now. Its also louder. It sounds like I put race headers or a somewhat quiet exhaust on. The car sounds more aggressive. Shifts are smoother. I also installed the Progress 24mm adj RSB and with just these two mods, the car feels so much more solid and a good foundation for track usage. Now I just need a set of coilovers or Koni's to solidify the solidness of the car. Overall, a must do mod for track usage as wheel hop is gone, however, do not buy the 75A if you plan on keeping your car strictly daily driven; the vibration is annoying. I stopped the glove box rattle by place a towel in it. I will be mixing mine up doing both track and commutes.

The mounts definently improve the performance but the vibration is pretty extreme. At idle the vibration is a lot. In sixth gear the car is also louder and the sound can get a little annoying. Also when you go over bumps in the street are speed bumps you feel it much more. It my opinion it is to harsh for a daily driver. If you were going to the track with your car then it would be great.

Review on 75A: I love how my car feels after this mod. The car feels so solid. I hate the vibration, which made my dash rattle even worst. It improved after some break in, but it can still be annoying. The ladies are not going to like it, so drive something else on your first date. Product description says "Street and Track", I say this is for Track ONLY. If this is your daily driver, buy the 60A.

My stock mounts broke so I got these and let me tell you there is no movement at all from the engine these mounts work great. The only thing is there is vibration in the cabin of the car which at times can be annoying, but I really like the mounts.

Wheel hop is completely gone, the install is straight forward and overall a very well worth it product.

I bought the 75A kit and OMG i love those the engine wont ever move an inch its amazing.

I purchased the 75A kit. Without the front mount, as innovative said I didn't need it. The mounts are a little buzzy in the car, not horrible. But MAN do these things work!!! Not a drop of engine movement. Hammer on, hammer off, doesn't even wiggle. Build quality is impressive also, very pretty.

These mounts put the factory Acura mounts to shame. These are a must for anyone who uses their car to compete in drag or autoX events, or just doesnt want to deal with stock mounts weakening and breaking (as mine did only 60,000 miles into the life of the car). The car vibrates a little more on startup, but for regular driving the additional vibration is not disruptive or bothersome at all (it is only really noticable at very low RPMs). These mounts, in addition to being sturdier for competetive driving and modified engines, do a great job of reducing wheel hop. Don't expect miracles in terms of traction - it is still a FWD car - but wheel hop will certainly be diminished to a much better level than stock.

After upgrading to these from the Energy Suspension inserts the difference is night and day. Wheel hop is completely gone, the install is straight forward and overall a very well worth it product.