Free Shipping Over $299.99
Orders of $299.99 or more ship free within the continental U.S.
Shipping to Alaska and Hawaii is additional and not included.
We do not ship international at this time.
Gates 02-06 RSX / 02-05 Civic Si Radiator Hose Reviews
0
0
0
0
22
Andrew | March 23rd, 2021
I have intercooler piping coming out at a 50-80
itr dc5 | October 11th, 2015
Does not touch intake tube. Problem solved. Easy install works great, good quality
Nolan Grieb | April 29th, 2015
The hose works exactly how it should. Gives plenty of room for my intake and probably helps keep IATs down drastically.
Tony G Conception | January 3rd, 2013
I have a injen CAI with K20z1 swap into a ep3
this worked greak to give my intake some room and looked great also
Josh | July 2nd, 2012
I bought this gate hose because the stock hose would lay on the rubber elbow of my injen cai and melt it. With gates hose installed i have no more issues like that. Easy to install and only 16 bucks.
Freznokidd | January 10th, 2012
Hose is perfect if u have a CAI as it routes coolant away. I have an AEM CAI, & stock hose sat right on CAI piping. Though I had to trim the hose where it hooked up to the head to keep it from resting on my battery, all & all, very satisfied with product.
Tony | July 22nd, 2011
Great product. I have an EP3 with the stock motor and an AEM V2 intake and my old hose would rub against it. With this hose it clears is just fine. Great for the price.
southstar ep3 | September 29th, 2010
I have an ep3 with a k24a2 and an old aem cai. The upper hose was hitting the cai hard and raising my iat temps to pretty much my motor temp lol. I put this on and my iat is a steady 84-95. Thanks clubep3!
William | August 26th, 2010
Great product,a lot more clearance now for my Fujita CAI.
Scott | August 13th, 2010
Great space. Great fitment. Great hose.
Stacy | July 7th, 2010
great fitment and made more room for my Injen CAI. just watch out for coolant spill :)
Mike | March 25th, 2010
This is a great product, it takes no time at all to install and it give a lot more room for and cai. 5*
Albert V. | February 10th, 2010
a lot more clearance now for my injen cold air. i hated it rubbing against it. much cleaner now
Robert R.. | November 19th, 2009
Great product took 10 min or less to install a must have with aftermarket air intakes.
Jordan Browning | September 19th, 2009
Bought this because I was tired of my radiator hose rubbin' my Injen intake coupler and raisin' the temps (at least a little, lol). Took a whole 2 minutes to swap out and it looks great. Watch out for coolant spillage though!
Blaine | May 5th, 2009
This radiator hose is a must for the rbc and cheap. So if your doing the rbc swap i highly recommend. Makes it so much easier and looks clean.
derekfccdc5 | April 30th, 2009
My CAI was rubbing the stock hose and I haven't even installed my RBC yet. Hose was easy to install and clears everything just fine. Recommended for anyone that owns an RSX.
Daniel | March 13th, 2009
Goes around the cold air intake hose just as advertised. Does not touch the intake. Great fitment also.
Zack Zweifel | March 3rd, 2009
I have a k24a2 swap in my DC5 with the RBC manifold and Injen CAI and this hose fits amazing for the application. Getting the stock hose off is a bit of a PIA but hose is worth it and needed.
Chalae See | November 30th, 2008
it's cheap but high quality product. well i have a RBC intake manifold, and it fit perfect around my CAI piping. recommened to others that have a RBC IM and a CAI..
mecca_18l | August 27th, 2008
Proof that inexpensive does not equal cheap,
this fit around my club RSX injen CAI very nicely, routed it off the tube and is a high quality unit.
Hamburglar | July 28th, 2008
Well it fits great and is a high quality hose!