StopTech Slotted & Drilled Front Rotor: Passenger Side

StopTech Slotted & Drilled Front Rotor: Passenger Side
    Some images may be for reference only

    Review this product


     in stock
    Shipping Locations
    Pennsylvania: 2 Available
    Nevada: 1 Available
    Michigan: 1 Available

    Will It Fit Your Vehicle?


    StopTech recognizes that great brakes need to look as good as they perform. Performance wheels and tires are best complemented with StopTech SportStop Cross-Drilled & Slotted rotors.

    SportStop Drilled & Slotted brake rotors prevent glazing of the pads, add bite and improve wet and dry braking performance.

    Every SportStop Drilled & Slotted brake rotor is produced from a high quality Centric Parts blank casting and finished in a durable e-coating for corrosion resistance.

    SportStop Drilled & Slotted rotors look great behind custom wheels, improve the initial bite of the brake pads, and help wipe away the debris that forms between the pad and the disc. A set of SportStop cross-Drilled & Slotted rear replacement rotors is a great way to match the aesthetics of a StopTech Big Brake Kit with the cross-Drilled & Slotted rotor option.

    *E-Coated Finish*

    Every SportStop rotor is finished with black e-coating on both sides of the hat, inside the the cooling vanes, and on the outside edge. E-coating is a superior electro-statically applied finish designed to withstand 400 hours of salt water exposure without rusting. This is especially important on both mounting faces of the hat where it touches the hub flange and back face of the wheel. Any accumulation of rust in these area can lead to installed lateral run out issues.

    *Power Alloy Metallurgy*

    Power Alloy metallurgy is exclusive feature of SportStop rotors. In specific vehicle applications, StopTech works with foundry partners to increase the molybdenum or carbon content of the castings, and to carefully control the cooling rate during production to reach targets for hardness and tensile strength.

    *Cooling Vane Design*

    Nearly all SportStop Cross-Drilled & Slotted rotors have unique Drilled & Slotted hole patterns for the left and right sides of the vehicle. For these directional patterns, straight vane or pillar vane rotors are used to ensure that a Drilled & Slotted hole never touches a cooling vane.


    • Part Number: 127.40048R
    • Location: Front
    • Manufacturer: Stop Tech
    • Position: Right (Passenger)
    • Rotor Construction: 1 piece
    • Rotor Type: Drilled and Slotted

    Vehicle Fitment

    Honda S2000
    2000 Honda S2000 All
    2001 Honda S2000 All
    2002 Honda S2000 All
    2003 Honda S2000 All
    2004 Honda S2000 All
    2005 Honda S2000 All
    2006 Honda S2000 All
    2007 Honda S2000 All
    2008 Honda S2000 All
    2009 Honda S2000 All

    Product Reviews

    Be the first to review this product

    Add Your Review