Snow Performance Stage 1 Boost Cooler
Part Number: 201

Snow Performance Stage 1 Boost Cooler
    Some images may be for reference only

    Free Shipping
    Inside Continental United States

     30 In Stock


    Earn 584 reward points. Learn More

    Will It Fit Your Vehicle?

    This is not a vehicle specific part

    Please read the product description and details prior to purchase. Please contact us if you need assistance.


    Race gas quality fuel on pump gas! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 1 Boost Cooler® water-methanol injection kit is available for all forced induction applications (supercharged/turbocharged) and uses a adjustable boost switch to inject a fixed amount of water-methanol into the system until boost goes below the switch set point. Proven to deliver 30-70 HP increases to all forced induction applications! This makes it a good choice for low to medium boost setups (1-15 PSI) looking for an octane enhancement and cooler intake charge. Activation can also be set up through any other user-chosen switch, such as a full throttle switch, nitrous switch, etc.


    • Cooler Denser Air Charge
    • Achieve 116 Octane Quality Fuel From Pump Gas
    • Safely Run More Boost & Timing
    • Cleans Engine Combustion Of Carbon Build Up
    • Reduce Air Temperatures Greater and More Consistent Than Air to Air Intercooler


    • Made in USA
    • Nickel Plated Methanol Resistant Metal Fittings
    • Industry Leading 300 PSI Pump For More Pressure Than The Competition
    • Adjustable Boost Setting
    • Level Sensor Upgrade and Red LED to Alert User of Low Level
    • Green LED to Alert User When System is Injecting
    • Your Choice of Red, Blue, or Black Methanol Resistant High Temp Nylon Tubing
    • 2 Proprietary Hypersonic™ Nozzles For The Best Atomization on the Market

    Whats In The Box:

    • 300 PSI UHO (Ultra High Output) Pump
    • 3 Quart Reservoir
    • All Tubing Necessary for Installation
      • 20' ¼ Inch High Temp Nylon Tubing
      • 18" High Pressure Boost Line
    • Adjustable Boost Switch (1-15 PSI)
    • Pig Tail Harness
    • Level Sensor Upgrade
    • 1 Nozzle Holder/Check Valve Combo
    • 2 Hyper-Sonic™ Nozzles
    • Required Hardware Needed For Installation
    • Snow Performance Running S Decal
    • Comprehensive Instructions to Install on Any Forced Induction Vehicle
    • Snow Performance 1-Year Warranty

    Type Of Pump Proprietary 300 PSI UHO Pump, Dual Outlet EPDM Seals, Fully Adjustable, Proprietary Heat Dissipation Flange, (2) 1/4" Push-lock Inlet/Outlet Fittings, Dimensions (4"L x 7 1/4"H x 3 3/4"W - Including Mounting Bracket)

    Standard Reservoir 3 Qt Reservoir, Black, Snow Performance Logo Red, Dimensions (8.63"L x 10"H x 4.12"W - Including Tabs/Cap)

    Controller Adjustable (1-15) PSI Boost Switch

    Nozzle 3 Hyper-Sonic Nozzles (175 ml/min, 375 ml/min, 625 ml/min)

    Tubing 1/4" O.D. High Temp Nylon Tubing (800 PSI Burst Rating)

    Accessories Fluid Level Sensor, Green/Red LEDs, Nozzle Holder/Check Valve Combo

    Fitment All Forced Induction (Supercharged/Turbocharged) Vehicles

    Warranty Snow Performance 1-Year Warranty



    Brand: Snow Performance
    Part Number: 201

    Vehicle Fitment

    This part does not have vehicle specific fitment

    Product Reviews

    Be the first to review this product

    Add Your Review