Karcepts 36mm Swap Hubs

Karcepts 36mm Swap Hubs
    Some images may be for reference only

    Review this product

    $320.00
     

     normally in stock
    Shipping Locations
    Karcepts: Inventory Not Provided

    Will It Fit Your Vehicle?

    Fitment Notes: K-swaps Only


    Description

    Karcepts 36mm Swap Hubs provide the SOLUTION for upgrading to OEM Honda/Acura “36mm” axles in high powered 1988-2005 Civics, 1990-2001 Integras, 1988-1991 CRX’s, and 2009-2013 Fits. Perfect for K-Swaps; but can also be used with high output B, D, F, H, and J-Swaps.

    Like breaking axles? Level 1 Swap Axles just don't cut the mustard with a rating of only 200WHP. Whose K-Swap doesn't make over 200WHP?!? Level 2.9 Swap Axles are not much better of an alternative as they still utilize the smaller Civic/Integra/CRX axle spline and will run a good $800 for a pair. This is where OEM Honda/Acura “36mm” axles fit in. They utilize a substantially larger axle spline which allows them to handle higher horsepower and torque outputs, yet they are extremely cost effective. This larger axle spline is observed in chassis such as the Acura RSX-S, Honda 06+ Civic Si, and Honda Prelude. Unfortunately, this larger spline is unable to be installed directly into OEM Civic, Integra, or CRX hubs, so that is where our Karcepts 36mm Swap Hubs come into play. Karcepts Hubs are modeled almost exactly after the OEM Honda/Acura hubs they replace, except that the splines now match that of the larger “36mm” axles. Side Note: Internet forum terminology has named the larger OEM spline axles “36mm”. We have conformed to that terminology as not to confuse others. However; for educational and axle identification purposes, “36mm” is actually the socket size used for the axle nut of these larger spline axles. The larger spline diameter in reality measures 29.50mm on these axles.

    • CNC turned out of billet high strength chrome-moly steel
    • Oil quenched and tempered
    • Maintains OEM rotor-centric attributes
    • Includes 2.50" long ARP extended studs
    • Designed for the larger OEM 29.50mm axle spline (36mm axle nut socket)
    • OEM 36mm axles have proven time and again to easily sustain 500+ WHP

    Use Karcepts P/N: KWH04 to replace factory OEM Acura hubs found on all USDM 1990-1993 Acura Integra models. These hubs use a 42mm I.D. wheel bearing.

    Details

    • Part Number: KWH04
    • Manufacturer: Karcepts

    Vehicle Fitment

    • K-swaps Only
    Acura Integra
    1990 Acura Integra Coupe
    1991 Acura Integra Coupe
    1992 Acura Integra Coupe
    1993 Acura Integra Coupe
    1990 Acura Integra Sedan
    1991 Acura Integra Sedan
    1992 Acura Integra Sedan
    1993 Acura Integra Sedan

    Product Reviews

    Be the first to review this product

    Add Your Review