Conversion Mount Kit for the 1990-1993 Honda Accord Sedan (CB)
Designed to fit the stock manual Accord EX CB7/CB9 chassis when converting to a manual H-Series engine or manual 94-01 F-Series transmission.
NOTE: This mount kit is used for vehicles that need a 4 BOLT REAR MOUNT. If your vehicle requires a 3 BOLT REAR MOUNT see:
- 90-93 ACCORD CONVERSION H22 MOUNT KIT (WITH 3 BOLT REAR MOUNT) - 29350
It is strongly recommended that all installs be done by a mechanic or automotive specialist.
Mounts CAN NOT be returned or swapped out after they have been bolted down (revealing bolt impressions).
PLEASE MAKE SURE THIS KIT FITS YOUR VEHICLE BEFORE BOLTING THEM IN PLACE.
Innovative Engine Mounts are built for performance driving.
Although Innovative's bushings are made to absorb engine vibration, you may still notice slight vibration depending on your engine's series and HP.
Innovative Mounts removes the dampening oil containers harbored by OEM/Stock mounts.
By switching to stiffer mounts without the fluid reduces wheel hop and increases driving response.
Unique no-tear vibration minimizing bushings. CAD/CAM Designed. Stress Analyzed. Lifetime warranty.
Driver Mount - 29310
Passenger Mount - 29320
Rear Mount - 29731
Alternate Passenger Mount - 29324 (for automatic to manual 5 speed swaps)
Please Note: When placing your order for this kit, there are 3 different rear mount styles ( the rear mount bolts to the rear subframe behind the engine). One is a tall style mount with a 4 hole bolt pattern. The second a short style mount with a 3 hole bolt pattern (sits flat on the rear subframe). Finally the third mount (more common on the auto chassis) is a tall 3 bolt mount has a vacuum assist solenoid attached to it. If you are unsure which style you need feel free to contact us before ordering.