Ingalls Front and Rear Camber Kit: Rubber
Ingalls front and rear camber kit for the drivers (left) and passenger (right) sides.
Front Camber Kit
For 2002 model RSX's, the last numbers of your VIN must be 2C003184 and higher for these bolts to fit.
Comes with two bolts, one for each side
Adjustment Range up to +/- 1°
Note: For positive camber adjustment, rotate the upper Fastcam arrow towards the tire and the lower Fastcam arrow towards the engine. For negative camber adjustment, rotate the upper Fastcam arrow towards the engine and the lower Fastcam arrow towards the tire.
If you need more than 1° of adjustment on the front you can buy a second 81280 bolt kit to get up to 2° of adjustment.
Rear Camber Kit
Rear Adjustment Range: -4° to +7°
Ingalls rubber bushings are designed for the "street" use only vehicle. They provide a more factory like ride. These bushings do not need to be lubricated, but will not provide you with that "tight" suspension feel.
- Part Number: 81280 / 38970
- Location: Front and Rear
- Manufacturer: Ingalls
- Position: Left and Right (Driver and Passenger)
- For 2002 Acura RSX's VIN must be 2C003184 and higher
Fits all 2003 to 2006 Acura RSX models.
- Acura RSX
- 2002 Acura RSX Type-S
- 2003 Acura RSX Type-S
- 2004 Acura RSX Type-S
- 2005 Acura RSX Type-S
- 2006 Acura RSX Type-S
- 2002 Acura RSX Manual
- 2003 Acura RSX Manual
- 2004 Acura RSX Manual
- 2005 Acura RSX Manual
- 2006 Acura RSX Manual
- 2002 Acura RSX Automatic
- 2003 Acura RSX Automatic
- 2004 Acura RSX Automatic
- 2005 Acura RSX Automatic
- 2006 Acura RSX Automatic
- Honda Civic
- 2001 Honda Civic Coupe
- 2002 Honda Civic Coupe
- 2003 Honda Civic Coupe
- 2004 Honda Civic Coupe
- 2005 Honda Civic Coupe
- 2001 Honda Civic Sedan
- 2002 Honda Civic Sedan
- 2003 Honda Civic Sedan
- 2004 Honda Civic Sedan
- 2005 Honda Civic Sedan
- 2002 Honda Civic Si Hatchback
- 2003 Honda Civic Si Hatchback
- 2004 Honda Civic Si Hatchback
- 2005 Honda Civic Si Hatchback
Customers Also Bought
4 reviews for Ingalls Front and Rear Camber Kit: Rubber
4.8 out of 5.0
9/30/2013 by joel vincent flores
Well this camber kit was awesome but the rear camber arms needed to be modified to make accomadate my settings I wanted of negative 1deg rears. The fronts were ok. I like how they look after a little modification. Also I have a type s brake and lug swap. Im real happy with this camber kit wish ingalls made front camber plates!
5/29/2012 by Rico Rodriguez
oooooohh can you say comfy?
Yea baby! 02 RSX 5-Speed, with the 17" Type S Wheels. With over 260,000 miles and i finally decided to drop it with a 1" Front & 1.4" Rear. Wanted to do springs and stock shock combo because its ALOT comfortable than my Nissan that has Coilovers with Pillowballl top mounts. When you dropped the RSX, it will give your suspension "Negative Camber" front and back. In stock form, its not adjustable. So when i found that Ingalls makes Rubber Camber kit, i knew that was the ones for me. I ordered this kit with just 1 set of Front Camber bolts. Got it aligned at my local Acura and the back was perfectly aligned but the front wasn't perfect because the tech ran out of alignment room. I needed a second set of Front Camber Bolts. In my opinion buy the extra set of camber bolts for the front. More comfortable than the Polyurethane rear camber kit other manufactures make. Conclusion, car is riding low and still comfy.
2/21/2010 by Richard Sagmiller II
Ingals Camber Kit
I used this kit with Eibach sport complete. Works great, fairly adjustable. Only thing to remember is that these are not self sustained. I suggest a quarterly check( clean and grease ) to keep them in top shape. Besides the obvious maintenance, this product is top notch.
9/17/2009 by Ricky D.
AWESOME, perfect kit before alignment.
I bought these with my Progress Goods and Hotchkis rear endlinks. After alignment things were perfect. Awesome Camber kits and easy installation.