Injector Dynamics 1050cc Fuel Injectors
Part Number: 1050.48.14.14.4
Inside Continental United States
|Quantity 1 equals four injectors|
Earn 1040 reward points. Learn More
Will It Fit Your Vehicle?
**High Impediance Injector, no resistor box required**
These injectors flow 1535cc/min at 100psi of fuel pressure
They are a 48mm long body, shorter than normal injectors. The adaptor tops make them "normal" 60mm length and adapt them to 11mm (B series) or 14mm (K series) orings. The K series guys can run the injectors with no adaptors at all and they are the same length as the OEM rsx injectors so no spacers needed on the rail.
These have a droplet size comparable to a 600cc Siemens injector and way better spray pattern and atomization than any other 1000cc injector on the market. The proper battery comp values are also provided with each set so you can set it up in your computer and have consistent a/f ratios as battery voltage fluctuates. Most other injectors don't offer that information at anything other than 1 voltage level. includes the injector clips with pins.
|Product Notes:||Requires a programmable ECU to control injectors.|
2 reviews for Injector Dynamics 1050cc Fuel Injectors
5 out of 5.0
11/20/2009 by Erik
Good stuff, 1000cc injectors in mildly modded wrx, idles/drive at least as good as stock. Dont bother with stair stepping your injectors as the power goes up because you are worried about idle quality, just put these in once and be done.
4/6/2009 by Bryan Ngo
Best technology in injectors!
run pretty much like stock injectors, great!