Gates 02-06 RSX / 02-05 Civic Si Radiator Hose
Part Number: 21229
Inside Continental United States
Earn 36 reward points. Learn More
Will It Fit Your Vehicle?
Fitment Notes01-05 Honda Civic with K-Series swap and RSX/02-05 Civic Si Radiator
This Gates radiator hose is used for increased clearance with cold air intakes and RBC/RRC intake manifolds on the 02-06 Acura RSX (DC5), 02-05 Civic Si (EP3), and 01-05 Civic (EM2) with k-series swap.
Advanced Fiber Construction. Exceptional durability and resistance to pressure extremes.
Premium EPDM Rubber Compound. Protects against the high temperatures of full throttle driving. Prolongs the effectiveness of coolant because it's 10 to 15 times more resistant to water permeation than silicone hose.
Electro-chemically Resistant ECR Tube Stock. Combats the leading cause of premature hose failure - electrochemical degradation (ECD).
|Vehicle Notes:||01-05 Honda Civic with K-Series swap and RSX/02-05 Civic Si Radiator|
21 reviews for Gates 02-06 RSX / 02-05 Civic Si Radiator Hose
5 out of 5.0
10/11/2015 by itr dc5
Does not touch intake tube. Problem solved. Easy install works great, good quality
4/29/2015 by Nolan Grieb
The hose works exactly how it should. Gives plenty of room for my intake and probably helps keep IATs down drastically.
1/3/2013 by Tony G Conception
Gates Radiator Hose
I have a injen CAI with K20z1 swap into a ep3 this worked greak to give my intake some room and looked great also
7/2/2012 by Josh
Inexpensive fix for cai/hose contact.
I bought this gate hose because the stock hose would lay on the rubber elbow of my injen cai and melt it. With gates hose installed i have no more issues like that. Easy to install and only 16 bucks.
1/11/2012 by Freznokidd
Gates upper rad hose
Hose is perfect if u have a CAI as it routes coolant away. I have an AEM CAI, & stock hose sat right on CAI piping. Though I had to trim the hose where it hooked up to the head to keep it from resting on my battery, all & all, very satisfied with product.
7/22/2011 by Tony
Great product. I have an EP3 with the stock motor and an AEM V2 intake and my old hose would rub against it. With this hose it clears is just fine. Great for the price.
9/29/2010 by southstar ep3
I have an ep3 with a k24a2 and an old aem cai. The upper hose was hitting the cai hard and raising my iat temps to pretty much my motor temp lol. I put this on and my iat is a steady 84-95. Thanks clubep3!
8/26/2010 by William
Great product,a lot more clearance now for my Fujita CAI.
8/13/2010 by Scott
Great space. Great fitment. Great hose.
7/7/2010 by Stacy
Gates Radiator Hose
great fitment and made more room for my Injen CAI. just watch out for coolant spill :)
3/25/2010 by Mike
This is a great product, it takes no time at all to install and it give a lot more room for and cai. 5*
2/10/2010 by Albert V.
a lot more clearance now for my injen cold air. i hated it rubbing against it. much cleaner now
11/19/2009 by Robert R..
Great product took 10 min or less to install a must have with aftermarket air intakes.
9/19/2009 by Jordan Browning
Great product for RBC
Bought this because I was tired of my radiator hose rubbin' my Injen intake coupler and raisin' the temps (at least a little, lol). Took a whole 2 minutes to swap out and it looks great. Watch out for coolant spillage though!
5/5/2009 by Blaine
This radiator hose is a must for the rbc and cheap. So if your doing the rbc swap i highly recommend. Makes it so much easier and looks clean.
4/30/2009 by derekfccdc5
My CAI was rubbing the stock hose and I haven't even installed my RBC yet. Hose was easy to install and clears everything just fine. Recommended for anyone that owns an RSX.
3/14/2009 by Daniel
Goes around the cold air intake hose just as advertised. Does not touch the intake. Great fitment also.
3/3/2009 by Zack Zweifel
Gates Hose for k24 w/ RBC and CAI
I have a k24a2 swap in my DC5 with the RBC manifold and Injen CAI and this hose fits amazing for the application. Getting the stock hose off is a bit of a PIA but hose is worth it and needed.
12/1/2008 by Chalae See
it's cheap but high quality product. well i have a RBC intake manifold, and it fit perfect around my CAI piping. recommened to others that have a RBC IM and a CAI..
8/27/2008 by mecca_18l
Very nice, How much?
Proof that inexpensive does not equal cheap, this fit around my club RSX injen CAI very nicely, routed it off the tube and is a high quality unit.
7/28/2008 by Hamburglar
Well it fits great and is a high quality hose!