Exedy Hyper Single Clutch Kit

Exedy Hyper Single Clutch Kit
    Some images may be for reference only

    Review this product

    $1,607.33
     

     in stock
    Shipping Locations
    Michigan: 10+ Available

    Will It Fit Your Vehicle?


    Description

    The EXEDY Hyper Single Series clutch is engineered to optimize the performance of cars that are moderately modified, but do not require the clutch capacity of a multi-plate clutch. Similar to our multi-plate clutches, it has a purple anodized, forged aluminum cover. The aluminum cover is stiffer than a stamped cover and therefore allows a higher lever ratio to maintain the pedal efforts at a reasonable level. There is no clamp load deflection as found in a pressed metal type cover. Additionally, the pressure plate features a series of turbine-like, air flow enhancing vanes that keep the clutch cooler under extreme operating conditions to improve wear life.

    All Hyper Single clutches come with a chromoly steel flywheel and are normally supplied with a 6-puck cerametallic facing and a spring center damper disc assembly. However, on select vehicles, the new VF (Various Friction) disc may be offered. The chromoly flywheel is lighter than OEM for improved engine response, and a lighter overall assembly. The disc is generally smaller and thinner than the OEM disc making for lower inertia and therefore quicker, easier shifting and less wear and tear on the transmission synchros. The higher clamp load and cerametallic friction facings give approximately twice the holding torque of the OEM clutch and higher than other single disc clutches.

    VF (Various Friction) Disc

    The VF enables the driver to operate the clutch through an easy-to-feel half engagement thanks to the Ultra Fiber friction material all while having a high heat dissipation and torque capacity due to the integrated metal facing. Furthermore, pedal effort has been drastically reduced and improved by the re-engineering and re-designing of the engagement point with newly developed cushioning plates.

    All EXEDY Racing Hyper Single Series Clutch Kits carry SFI 1.1 Certification. Which means, when you buy these products, you can be confident they are certified for use in competitive motorsports.

    • Clamp Load 2270
    • Disc Diameter (Inches) 7.9
    • Disc Diameter (Millimeters) 200
    • Kit Contents CH56S, DH35D, FH07, BS04
    • Spline Count 24
    • Spline Size (Inches) 1
    • Spline Size (Millimeters) 26
    • Torque Capacity (ft/lbs.) 263
    • Notes Hyper Single Clutch, VF Series, Sprung Center Disc, Pull Type Cover, For use w/ Hyper Accessory Kit HCAK105

    Details

    • Part Number: HH01SDV
    • Manufacturer: Exedy

    Vehicle Fitment

    Honda S2000
    2000 Honda S2000 All
    2001 Honda S2000 All
    2002 Honda S2000 All
    2003 Honda S2000 All
    2004 Honda S2000 All
    2005 Honda S2000 All
    2006 Honda S2000 All
    2007 Honda S2000 All
    2008 Honda S2000 All
    2009 Honda S2000 All

    Product Reviews

    Be the first to review this product

    Add Your Review