Prices are for a flow balanced set of 4 injectors
These injectors are designed to fit the stock manifold only for the years shown above. They will not fit intake manifolds from prior years.
Flow rates and set balancing in-house by DeatschWerks
Flow balanced to within 1-2% (flow report included)
Excellent spray pattern and atomization for optimized idle and tuning
Technical assistance and tuning data available via phone or email
3-year comprehensive warranty
Fuel Pressure Range: 40-90 psi
Minimum Pulse Width: 1.5 ms
Maximum Duty Cycle: 90%
Coil Impedance: 14.2 ohm
Injector Type: Denso Top Feed
Connector Type: Sumitomo
Injector Flow Rate:
43 psi: 1044 cc/min; 99.4 lb/hr.
58 psi: 1171 cc/min; 111.5 lb/hr.
70 psi: 1300 cc/min; 123.8 lb/hr.
80 psi: 1361 cc/min; 129.6 lb/hr.
90 psi: 1440 cc/min; 137.1 lb/hr.
100 psi: 1554 cc/min; 148.0 lb/hr.