The Formula 6 HANS is a 6 point FIA approved harness for reclined or space limited seating positions as found in various formula cars, prototypes and kit cars. The routing of the crotch belts is through D-Rings on the lap belts so there is no hardware between the legs of the driver in the small confines of the cockpit.

The Formula 6 features an aluminum multi-point release cam-lock buckle, 2"/3" HANS shoulder belts, 2" lap belts and 2" crotch belts. The HANS specific 2"/3" shoulder belts are designed to make HANS use safer and more comfortable. The upper part of the shoulder belt is 2" wide, fitting perfectly on the friction surface of your HANS device. Standard 3" shoulder belts will work with HANS, but the 2"/3" belts give you a better fit and allow you to optimize the installation angles behind the seat.

The lap and crotch belts are supplied with wrap-in bolt on hardware which can also be removed for installation with pinch-plates as found in many formula type cars. The 2" shoulder belts have wrapped in bolt-on brackets, that can be removed, to allow the shoulder belts to be wrapped around a tube or bar.

Features:

6 point racing belt for formula cars

HANS Specific 2"/3" Shoulder belts with 2" lap belts

FIA Homologation

Bolt in hardware

---

WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.