• Sort: 
  • Per Page: 

Part Number: TPS-V2
5 out of 5 5 out of 5 5 out of 5 5 out of 5 5 out of 5 7 Ratings
The K-Tuned V2 Billet TPS Sensor features a revised design that is a direct plug in to the factory engine harness. We also added some slotted hol...   read more

$134.00

free US ground shipping

In Stock

Vehicle Fitment
K-Series Engine

Part Number: KID-001
5 out of 5 5 out of 5 5 out of 5 5 out of 5 5 out of 5 3 Ratings
The K-Tuned Immobilizer Bypass unit is designed to allow the use of a stock K-series ecu in a swap application. This affordable option is very ea...   read more

$183.00

free US ground shipping

In Stock

Vehicle Fitment
K-Series Engine

Part Number: KPB-K20-500-2
5 out of 5 5 out of 5 5 out of 5 5 out of 5 5 out of 5 2 Ratings
The K-Tuned Adjustable EP3 Pulley kit is the newest addition to our ever growing parts line-up. This simple and very useful part has been in dev...   read more

$148.00

free US ground shipping

In Stock

Vehicle Fitment
K-Series Engine

Part Number: KUW-24-258
5 out of 5 5 out of 5 5 out of 5 5 out of 5 5 out of 5 1 Ratings
Product Notes: K24 Cylinder heads only
The new K-Tuned Upper Coolant Housing is now available. With applications for both K20 and K24 engines, these housings will provide several uniq...   read more

$126.00

free US ground shipping

In Stock

Vehicle Fitment
K-Series Engine

Part Number: KTD-AA-DEL
5 out of 5 5 out of 5 5 out of 5 5 out of 5 5 out of 5 1 Ratings
The K-Tuned Idle Air Assist Delete Kit will help clean up the overall look of any K-series engine by removing the ugly and unnecessary Idle Air A...   read more

$35.00

free US ground shipping

In Stock

Vehicle Fitment
K-Series Engine

Part Number: KTD-CC-01
5 out of 5 5 out of 5 5 out of 5 5 out of 5 5 out of 5 1 Ratings
K-Tuned is now offering a clean and simple K-series coil pack cover. Over the years, several customers have asked us if we were ever going to do...   read more

$73.00

free US ground shipping

In Stock

Vehicle Fitment
K-Series Engine

Part Number: KST-UNV-350
5 out of 5 5 out of 5 5 out of 5 5 out of 5 5 out of 5 1 Ratings
K-Tuned has the solution to your lower rad hose problems. Some of the motors we have received came with the oem plastic water neck broken. Until ...   read more

$158.00

free US ground shipping

In Stock

Vehicle Fitment
K-Series Engine

Part Number: RBC-62-342
5 out of 5 5 out of 5 5 out of 5 5 out of 5 5 out of 5 1 Ratings
Product Notes: Fits all RBC/RRC manifolds
Finally the best RBC Adaptor ever created. The K-Tuned Dual 62/70mm RBC adaptor has a unique press fit 7.5mm ring that allows the use of either ...   read more

$65.00

free US ground shipping

In Stock

Vehicle Fitment
K-Series Engine

Part Number: KTD-SFT-LOC
5 out of 5 5 out of 5 5 out of 5 5 out of 5 5 out of 5 1 Ratings
Product Notes: Works with any RSX Shift Box
The oem shifter and cable system might be fine for a car going to pick up some groceries, but in a performance car this setup is definitely lacki...   read more

$279.99

free US ground shipping

In Stock

Vehicle Fitment

Designed for a K-Series Engine Swap

Acura RSX
2002-2006 Acura RSX Type-S
2002-2006 Acura RSX Manual

Acura Integra
1994-2001 Acura Integra Coupe
1994-2001 Acura Integra Sedan

Honda Civic
1988-1991 Honda Civic All
1992-2000 Honda Civic Hatchback
1992-2005 Honda Civic Coupe
1992-2005 Honda Civic Sedan

Honda CRX
1988-1991 Honda CRX All

Honda Del
1993-1997 Honda Del Sol All

Part Number: SFT-KNB
5 out of 5 5 out of 5 5 out of 5 5 out of 5 5 out of 5 1 Ratings
The K-Tuned Billet Shift Knob is the result of quite a bit of customer and racer feedback. We already offer several K-Series shifter upgrades so...   read more

$86.00

free US ground shipping

In Stock

Different Options Available
Vehicle Fitment
Universal

Part Number: KTD-OILCAP
5 out of 5 5 out of 5 5 out of 5 5 out of 5 5 out of 5 1 Ratings
After a countless number of requests, the K-Tuned Billet Oil Cap is now available. Note right away that this oil cap is not just specific to the ...   read more

$58.00

free US ground shipping

In Stock

Different Options Available
Vehicle Fitment
K-Series Engine

Part Number: BIL-DS
5 out of 5 5 out of 5 5 out of 5 5 out of 5 5 out of 5 1 Ratings
The K-Tuned Billet Oil Dipstick was designed to follow the exact contour of the OEM valvecover, giving it a smooth, shaved look. Along the botto...   read more

$79.00

free US ground shipping

In Stock

Different Options Available
Vehicle Fitment
K-Series Engine

Part Number: KRB-CMFG-KIT
4 out of 5 4 out of 5 4 out of 5 4 out of 5 4 out of 5 2 Ratings
The K-Tuned multi-port fuel rail is by far the best looking rail on the market. Using positive customer feedback and the demand to expand our fu...   read more

$215.99

free US ground shipping

In Stock

Different Options Available
Vehicle Fitment
K-Series Engine

Part Number: RDX-INJ-COM
0 out of 5 0 out of 5 0 out of 5 0 out of 5 0 out of 5 0 Ratings
Product Notes: Requires the use of K-pro or engine management software
K-Tuned is now offering sets of OEM (Denso) Acura RDX injectors. These injectors are rated for 410cc (at 38 psi) and 550cc (at 70psi) and offer a...   read more

$188.00

free US ground shipping

In Stock

Vehicle Fitment
K-Series Engine

Part Number: KR-B-402
 out of 5  out of 5  out of 5  out of 5  out of 5 0 Ratings
Swapping a K-series engine into your car? To set up the fuel system properly, you'll need to remove the single inlet, return-less factory fuel ra...   read more

$148.00

free US ground shipping

In Stock

Different Options Available
Vehicle Fitment
K-Series Engine

Part Number: KP-EP3-382
 out of 5  out of 5  out of 5  out of 5  out of 5 0 Ratings
Product Notes: K20A3 Engines Only
You no longer need to buy the EP3 idler pulley setup from Honda to complete a K-series engine swap in your car. The K-Tuned pulley kit eliminates...   read more

$215.99

free US ground shipping

In Stock

Vehicle Fitment
K-Series Engine

Part Number: KP-K20-385
 out of 5  out of 5  out of 5  out of 5  out of 5 0 Ratings
Product Notes: **Note: Doesn't work with K20A3 motor**
You no longer need to buy the EP3 idler pulley setup from Honda to complete a K-series engine swap in your car. The K-Tuned pulley kit eliminates...   read more

$233.99

free US ground shipping

In Stock

Vehicle Fitment
K-Series Engine

Part Number: CLK-001
 out of 5  out of 5  out of 5  out of 5  out of 5 0 Ratings
Product Notes: Does Not work with RHD vehicles
Designed to fit K-swapped cars perfectly, this fully stainless steel clutch line with SS fittings comes complete with all the adapters needed for...   read more

$99.00

free US ground shipping

In Stock

Vehicle Fitment
K-Series Transmission

Part Number: TVC-623
 out of 5  out of 5  out of 5  out of 5  out of 5 0 Ratings
Product Notes: Applications: K20A/K20A2/K20A3/K20Z1 throttle bodies
K-Tuned's new velocity coupler is made from reinforced 4-ply silicone. This unique part completely removes the step commonly found at the throttl...   read more

$41.00

free US ground shipping

In Stock

Vehicle Fitment
K-Series Engine

Part Number: OF-001
 out of 5  out of 5  out of 5  out of 5  out of 5 0 Ratings
Product Notes: Universal Honda/Acura
The idea of re-usable oil filter has been used in many forms of racing for several years now, but surprisingly there were limited options availab...   read more

$101.00

free US ground shipping

In Stock

Quantity Discount Available
Vehicle Fitment
K-Series Engine

Part Number: KUW-20-256
 out of 5  out of 5  out of 5  out of 5  out of 5 0 Ratings
Product Notes: K20A2, K20A3, K20Z1 Cylinder heads only
The new K-Tuned Upper Coolant Housing is now available. With applications for both K20 and K24 engines, these housings will provide several uniq...   read more

$117.00

free US ground shipping

In Stock

Vehicle Fitment
K-Series Engine

Part Number: RBP-2-402
 out of 5  out of 5  out of 5  out of 5  out of 5 0 Ratings
Here is another useful part from K-Tuned. In the past, alot of people ruined the coating on their traction bars by welding on custom tabs to mou...   read more

$72.00

free US ground shipping

In Stock

Vehicle Fitment
Universal

Part Number: RDX-INJ-SET
 out of 5  out of 5  out of 5  out of 5  out of 5 0 Ratings
Product Notes: Requires use of K-pro or other engine management
K-Tuned is now offering sets of OEM (Denso) Acura RDX injectors. These injectors are rated for 410cc (at 38 psi) and 550cc (at 70psi) and offer a...   read more

$179.00

free US ground shipping

In Stock

Vehicle Fitment
K-Series Engine

Part Number: KHP-PG-301
 out of 5  out of 5  out of 5  out of 5  out of 5 0 Ratings
Some of you may be interested in deleting the heater hoses and core from your K-swapped vehicle. The K-Tuned T-stat plug and bracket allows you ...   read more

$35.00

free US ground shipping

In Stock

Vehicle Fitment
K-Series Engine

Part Number: RDX-CLIP4
 out of 5  out of 5  out of 5  out of 5  out of 5 0 Ratings
Product Notes: For RDX Injectors Only
Clips for the RDX injectors

$43.00

free US ground shipping

In Stock

Vehicle Fitment
K-Series Engine